Parameters |
Surface Mount |
YES |
Number of Pins |
44 |
JESD-609 Code |
e3 |
Moisture Sensitivity Level (MSL) |
3 |
Number of Terminations |
44 |
Terminal Finish |
TIN |
Additional Feature |
ALSO OPERATES AT 2.5V SUPPLY |
HTS Code |
8542.31.00.01 |
Technology |
CMOS |
Terminal Position |
QUAD |
Terminal Form |
J BEND |
Peak Reflow Temperature (Cel) |
245 |
Supply Voltage |
5V |
Terminal Pitch |
1.27mm |
Time@Peak Reflow Temperature-Max (s) |
30 |
Pin Count |
44 |
Qualification Status |
Not Qualified |
Operating Temperature (Max) |
70°C |
Supply Voltage-Max (Vsup) |
5.5V |
Temperature Grade |
COMMERCIAL |
Supply Voltage-Min (Vsup) |
4.5V |
Number of I/O |
15 |
uPs/uCs/Peripheral ICs Type |
SERIAL IO/COMMUNICATION CONTROLLER, SERIAL |
Clock Frequency |
8MHz |
Supply Current-Max |
25mA |
Data Rate |
230 kbps |
Address Bus Width |
4 |
Boundary Scan |
NO |
Low Power Mode |
YES |
External Data Bus Width |
8 |
Number of Serial I/Os |
2 |
Data Transfer Rate-Max |
0.125 MBps |
Communication Protocol |
ASYNC, BIT |
Source Url Status Check Date |
2013-06-14 00:00:00 |
Data Encoding/Decoding Method |
NRZ |
Height Seated (Max) |
4.57mm |
Length |
16.5862mm |
Width |
16.5862mm |
RoHS Status |
RoHS Compliant |
Lead Free |
Lead Free |
SC26C92C1A-T Overview
The type uPs/uCs/Peripheral ICs is SERIAL IO/COMMUNICATION CONTROLLER, SERIAL.In its configuration, 44 terminations are used.In order to operate it, a supply voltage of 5V is required.There are 2 serial I/Os available for communication of data.This electronic device is a type of 44-pin IC.A frequency of 8MHz is measured for this IC.A configuration of the chip is determined by its 44 pins.UART is able to operate at the maximum temperature of 70°C.Moreover, it is also able to perform ALSO OPERATES AT 2.5V SUPPLY.By maintaining the supply voltage below 5.5V, normal operation can be assured.A total of 15 I/Os are available for data transfer.Maintaining a voltage above 4.5V will ensure normal operation.The acceptable maximum supply current reaches 25mA.
SC26C92C1A-T Features
2 serial I/Os
Clock frequency of 8MHz
ALSO OPERATES AT 2.5V SUPPLY
15 I/Os
SC26C92C1A-T Applications
There are a lot of NXP Semiconductors / Freescale SC26C92C1A-T UARTs applications.
- Factory automation and process control
- Telecommunication Network Routers
- Infrared Transceivers
- Cellular data devices
- Handheld Terminals and Tablets
- Multi serial ports RS-232/RS-422/RS-485 Cards
- Wireless Infrared Data Communications Systems
- Cellular Data
- Personal Digital Assistants Modules
- Communications equipment