SC26C92A1N,112
| Parameters | |
|---|---|
| Mounting Type | Through Hole |
| Package / Case | 40-DIP (0.600, 15.24mm) |
| Surface Mount | NO |
| Packaging | Tube |
| Published | 2013 |
| JESD-609 Code | e3 |
| Feature | Configurable GPIO, Internal Oscillator, Timer/Counter |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 40 |
| Terminal Finish | Tin (Sn) |
| HTS Code | 8542.31.00.01 |
| Subcategory | Serial IO/Communication Controllers |
| Technology | CMOS |
| Voltage - Supply | 5V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | SC26C92 |
| Pin Count | 40 |
| JESD-30 Code | R-PDIP-T40 |
| Qualification Status | Not Qualified |
| Operating Temperature (Max) | 85°C |
| Operating Temperature (Min) | -40°C |
| Power Supplies | 5V |
| Temperature Grade | INDUSTRIAL |
| Number of Channels | 2, DUART |
| Number of I/O | 15 |
| uPs/uCs/Peripheral ICs Type | SERIAL IO/COMMUNICATION CONTROLLER, SERIAL |
| Clock Frequency | 8MHz |
| Supply Current-Max | 25mA |
| Address Bus Width | 4 |
| Boundary Scan | NO |
| Low Power Mode | YES |
| External Data Bus Width | 8 |
| Data Rate (Max) | 1Mbps |
| Number of Serial I/Os | 2 |
| Data Transfer Rate-Max | 0.125 MBps |
| Communication Protocol | ASYNC, BIT |
| Data Encoding/Decoding Method | NRZ |
| FIFO's | 8 Byte |
| With Modem Control | Yes |
| Height Seated (Max) | 4.7mm |
| Length | 52mm |
| Width | 15.24mm |
| RoHS Status | ROHS3 Compliant |
SC26C92A1N,112 Overview
UART is available in the cost-effective 40-DIP (0.600, 15.24mm) package.UART is possible to transmUART on 2, DUART channels.When UART comes to packaging, Tube is adopted as the packaging method.Its uPs/uCs/Peripheral ICs use SERIAL IO/COMMUNICATION CONTROLLER, SERIAL.40 terminations are used as parts of its configuration.This device is powered by a voltage of 5V.The current status of this electronic part is Obsolete.There are 2 serial I/Os available for communication of data.Through Through Hole, it can be mounted.This device operates at 5V.An 40-pin integrated circuit is what this particular device is.The clock frequency of this IC is measured at 8MHz.UART falls under the subcategory of Serial IO/Communication Controllers because of a series of similarUARTies.Several characteristics of Configurable GPIO, Internal Oscillator, Timer/Counter can be observed in it.Operating at 85°C is its maximum temperature limit.Providing power supplies of 5V makes it reliable and efficient for electronic designers.As a base part number, it is specified as SC26C92.A minimum temperature of -40°C is required to operate it.A total of 15 I/Os are available for the transfer of data.It reaches 25mA when the maximum supply current is acceptable.
SC26C92A1N,112 Features
2 serial I/Os
Clock frequency of 8MHz
Power supplies of 5V
15 I/Os
SC26C92A1N,112 Applications
There are a lot of NXP USA Inc. SC26C92A1N,112 UARTs applications.
- Point-of- Sale Terminals
- Handheld Terminal
- Factory Automation
- Cellular Phones DataPort
- Handheld Terminals and Tablets
- White goods
- Domestic Applications
- Cellular Data
- Universal PCI Bus Add-in Card
- Multimedia Systems