SC26C92A1A,529
| Parameters | |
|---|---|
| Factory Lead Time | 7 Weeks |
| Mounting Type | Surface Mount |
| Package / Case | 44-LCC (J-Lead) |
| Surface Mount | YES |
| Packaging | Tube |
| Published | 2004 |
| JESD-609 Code | e3 |
| Feature | Configurable GPIO, Internal Oscillator, Timer/Counter |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 44 |
| Terminal Finish | TIN |
| HTS Code | 8542.31.00.01 |
| Technology | CMOS |
| Voltage - Supply | 5V |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 245 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | SC26C92 |
| Pin Count | 44 |
| JESD-30 Code | S-PQCC-J44 |
| Qualification Status | Not Qualified |
| Operating Temperature (Max) | 85°C |
| Operating Temperature (Min) | -40°C |
| Temperature Grade | INDUSTRIAL |
| Number of Channels | 2, DUART |
| Number of I/O | 15 |
| uPs/uCs/Peripheral ICs Type | SERIAL IO/COMMUNICATION CONTROLLER, SERIAL |
| Clock Frequency | 8MHz |
| Supply Current-Max | 25mA |
| Address Bus Width | 4 |
| Boundary Scan | NO |
| Low Power Mode | YES |
| External Data Bus Width | 8 |
| Data Rate (Max) | 1Mbps |
| Number of Serial I/Os | 2 |
| Data Transfer Rate-Max | 0.125 MBps |
| Communication Protocol | ASYNC, BIT |
| Data Encoding/Decoding Method | NRZ |
| FIFO's | 8 Byte |
| With Modem Control | Yes |
| Height Seated (Max) | 4.57mm |
| Length | 16.5862mm |
| Width | 16.5862mm |
| RoHS Status | ROHS3 Compliant |
SC26C92A1A,529 Overview
In the 44-LCC (J-Lead) package, you can get the product at a low cost.The transmission of data takes place over 2, DUART channels.As far as packaging is concerned, Tube is used.The type uPs/uCs/Peripheral ICs of this circuit is SERIAL IO/COMMUNICATION CONTROLLER, SERIAL.Configured with 44 terminations.The device operates at 5V voltage.At present, this electronic part has a status of Obsolete.As a means of transferring data, there are 2 serial I/Os.Surface Mount is the method for mounting it.With a supply voltage of 5V, it operates.An 44-pin integrated circuit is what this particular device is.Its clock frequency is measured at 8MHz.Several characteristics of Configurable GPIO, Internal Oscillator, Timer/Counter can be observed in it.The device is capable of operating at a maximum temperature of 85°C.This part has a base part number of SC26C92.A minimum of -40°C is required for operation.Data transfer is supported by 15 I/Os.A maximum supply current of 25mA is acceptable.
SC26C92A1A,529 Features
2 serial I/Os
Clock frequency of 8MHz
15 I/Os
SC26C92A1A,529 Applications
There are a lot of NXP USA Inc. SC26C92A1A,529 UARTs applications.
- Personal Digital Assistants
- Remote Access Servers
- Domestic Applications
- Serial to Parallel/Parallel to Serial Converter
- Universal PCI Bus Add-in Card
- Multimedia Systems
- Gaming Terminals
- Ethernet Network Routers
- Point-of- Sale Terminals
- White goods