SC16C852VIET,151
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 36-TFBGA |
| Surface Mount | YES |
| Packaging | Tray |
| Published | 2010 |
| JESD-609 Code | e1 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 36 |
| Terminal Finish | Tin/Silver/Copper (Sn/Ag/Cu) |
| HTS Code | 8542.31.00.01 |
| Subcategory | Serial IO/Communication Controllers |
| Technology | CMOS |
| Voltage - Supply | 1.8V |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | SC16C852 |
| Pin Count | 36 |
| JESD-30 Code | S-PBGA-B36 |
| Qualification Status | Not Qualified |
| Operating Temperature (Max) | 85°C |
| Operating Temperature (Min) | -40°C |
| Power Supplies | 1.8V |
| Temperature Grade | INDUSTRIAL |
| Number of Channels | 2, DUART |
| uPs/uCs/Peripheral ICs Type | SERIAL IO/COMMUNICATION CONTROLLER, SERIAL |
| Clock Frequency | 80MHz |
| Address Bus Width | 8 |
| Protocol | RS485 |
| Boundary Scan | NO |
| Low Power Mode | YES |
| External Data Bus Width | 8 |
| Data Rate (Max) | 5Mbps |
| Number of Serial I/Os | 2 |
| Data Transfer Rate-Max | 0.625 MBps |
| Data Encoding/Decoding Method | NRZ |
| FIFO's | 128 Byte |
| With False Start Bit Detection | Yes |
| Height Seated (Max) | 1.15mm |
| Length | 3.5mm |
| Width | 3.5mm |
| RoHS Status | ROHS3 Compliant |
SC16C852VIET,151 Overview
In order to make it more cost-effective, this product is also available in a package of 36-TFBGA.There are 2, DUART channels used for transmission.Packaging is based on Tray.The type SERIAL IO/COMMUNICATION CONTROLLER, SERIAL is used to identify the uPs/uCs/Peripheral ICs on the board.In its configuration, 36 terminations are used.To operate it, 1.8V is provided as the supply voltage.The status of this electronic part is currently Obsolete.As a way to communicate data, the board has 2 serial I/Os.UART can be mounted through a way of Surface Mount.In order for it to operate, a voltage of 1.8V must be applied.Electronic devices such as this are known as 36-pin integrated circuits.In this IC, the clock frequency is 80MHz.Considering its similarities, it belongs to the Serial IO/Communication Controllers subcategory.The device is capable of operating at temperatures as high as 85°C.If the power supply is set to 1.8V, it is reliable and efficient for electronic designers.There is a default setting for the base part number of the part to be SC16C852.It is able to operate at the minimum temperature of -40°C.
SC16C852VIET,151 Features
2 serial I/Os
Clock frequency of 80MHz
Power supplies of 1.8V
SC16C852VIET,151 Applications
There are a lot of NXP USA Inc. SC16C852VIET,151 UARTs applications.
- Communications equipment
- Personal Digital Assistants Modules
- Domestic Applications
- Battery Operated Electronics
- Cellular data devices
- Point-of- Sale Terminals
- Handheld Terminals and Tablets
- Multimedia Systems
- Cellular Phones DataPort
- Ethernet Network Routers