SC16C852VIBS
| Parameters | |
|---|---|
| Surface Mount | YES |
| Number of Pins | 48 |
| Packaging | Bulk |
| JESD-609 Code | e4 |
| Moisture Sensitivity Level (MSL) | 2 |
| Number of Terminations | 48 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Subcategory | Serial IO/Communication Controllers |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.4mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 48 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 1.8V |
| Temperature Grade | INDUSTRIAL |
| Number of Channels | 2 |
| Max Supply Voltage | 1.95V |
| Min Supply Voltage | 1.65V |
| Nominal Supply Current | 2mA |
| uPs/uCs/Peripheral ICs Type | SERIAL IO/COMMUNICATION CONTROLLER, SERIAL |
| Clock Frequency | 80MHz |
| Data Rate | 5 Mbps |
| Address Bus Width | 8 |
| Boundary Scan | NO |
| Low Power Mode | YES |
| External Data Bus Width | 8 |
| Number of Serial I/Os | 2 |
| Touchscreen | Infrared (IR) |
| Communication Protocol | ASYNC, BIT |
| Data Encoding/Decoding Method | NRZ |
| Height Seated (Max) | 1mm |
| Length | 6mm |
| Width | 6mm |
| RoHS Status | RoHS Compliant |
SC16C852VIBS Overview
The transmission of information is carried out through 2 channels.Bulk is adopted for packaging.Its uPs/uCs/Peripheral ICs use SERIAL IO/COMMUNICATION CONTROLLER, SERIAL.48 terminations are used as parts of its configuration.During operation, it receives a voltage of 1.8V.Data communication is handled by 2 serial I/Os.In this case, the electronic device is a type of integrated circuit with 48 pins.Its clock frequency is measured at 80MHz.In light of numerous similarities, it is included in the subcategory of Serial IO/Communication Controllers.UART is important to keep the operating temperature below -40°C to ensure a long working period.Ideally, the operating temperature should not exceed 85°C in order to ensure long-term performance.As its configuration basis, the 48 pins are used.Keeping the supply voltage below 1.95V will ensure reliability.Supply voltages above 1.65V can ensure reliability.To ensure its high efficiency, a voltage of 1.8V is provided as the supply voltage.
SC16C852VIBS Features
2 serial I/Os
Clock frequency of 80MHz
Operating supply voltage of 1.8V
SC16C852VIBS Applications
There are a lot of NXP Semiconductors / Freescale SC16C852VIBS UARTs applications.
- Portable Appliances
- Handheld Terminals and Tablets
- GPS Systems
- Handheld Terminal
- Battery Operated Instruments
- Portable Applications
- DTE for Modem Communication Systems
- Factory Automation and Process Controls
- Factory automation and process control
- Router C ontrol