SC16C554IB64,128
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 64-LQFP |
| Surface Mount | YES |
| Packaging | Tape & Reel (TR) |
| Published | 2000 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 64 |
| Additional Feature | OPERATES AT 2.25 V MINIMUM SUPPLY |
| HTS Code | 8542.31.00.01 |
| Technology | CMOS |
| Voltage - Supply | 2.5V 3.3V 5V |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Reach Compliance Code | unknown |
| Base Part Number | SC16C554 |
| Pin Count | 64 |
| JESD-30 Code | S-PQFP-G64 |
| Qualification Status | Not Qualified |
| Operating Temperature (Max) | 85°C |
| Operating Temperature (Min) | -40°C |
| Temperature Grade | INDUSTRIAL |
| Number of Channels | 4, QUART |
| uPs/uCs/Peripheral ICs Type | SERIAL IO/COMMUNICATION CONTROLLER, SERIAL |
| Clock Frequency | 80MHz |
| Address Bus Width | 5 |
| Boundary Scan | NO |
| Low Power Mode | YES |
| External Data Bus Width | 8 |
| Data Rate (Max) | 5Mbps |
| Number of Serial I/Os | 4 |
| Data Transfer Rate-Max | 0.625 MBps |
| Communication Protocol | ASYNC, BIT |
| FIFO's | 16 Byte |
| With False Start Bit Detection | Yes |
| Height Seated (Max) | 1.6mm |
| Length | 10mm |
| Width | 10mm |
| RoHS Status | ROHS3 Compliant |
SC16C554IB64,128 Overview
The 64-LQFP package is the most cost-effective.Transmission uses 4, QUART channels.As for packaging, Tape & Reel (TR) is chosen.Its uPs/uCs/Peripheral ICs use SERIAL IO/COMMUNICATION CONTROLLER, SERIAL.In order to configure this device, 64 terminations are used.For its operation, it requires a supply voltage of 3.3V.In the present state, this electronic part is Obsolete.Data communication is supported by 4 serial I/Os.Mounting is possible through Surface Mount.There is 2.5V 3.3V 5V supply voltage for it.This electronic device is a type of 64-pin IC.Its clock frequency is measured at 80MHz.The device is capable of operating at temperatures as high as 85°C.Additionally, it can perform OPERATES AT 2.25 V MINIMUM SUPPLY.Its base part number is SC16C554.A minimum of -40°C is required for operation.
SC16C554IB64,128 Features
4 serial I/Os
Clock frequency of 80MHz
OPERATES AT 2.25 V MINIMUM SUPPLY
SC16C554IB64,128 Applications
There are a lot of NXP USA Inc. SC16C554IB64,128 UARTs applications.
- DTE for Modem Communication Systems
- Ethernet Network Routers
- White goods
- Handheld Terminal
- Factory Automation and Process Controls
- GPS Devices
- Router C ontrol
- Factory Automation
- Multi-port RS-232/RS-422/RS-485 Cards
- Factory automation and process control