SC16C2550IN40,112
| Parameters | |
|---|---|
| Mounting Type | Through Hole |
| Package / Case | 40-DIP (0.600, 15.24mm) |
| Surface Mount | NO |
| Packaging | Tube |
| Published | 2000 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 40 |
| Additional Feature | ALSO OPERATES AT 2.5V MINIMUM SUPPLY |
| HTS Code | 8542.31.00.01 |
| Subcategory | Serial IO/Communication Controllers |
| Technology | CMOS |
| Voltage - Supply | 2.5V 3.3V 5V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 245 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | SC16C2550 |
| Pin Count | 40 |
| JESD-30 Code | R-PDIP-T40 |
| Qualification Status | Not Qualified |
| Operating Temperature (Max) | 85°C |
| Operating Temperature (Min) | -40°C |
| Power Supplies | 3.3/5V |
| Temperature Grade | INDUSTRIAL |
| Number of Channels | 2, DUART |
| uPs/uCs/Peripheral ICs Type | SERIAL IO/COMMUNICATION CONTROLLER, SERIAL |
| Clock Frequency | 80MHz |
| Address Bus Width | 3 |
| Boundary Scan | NO |
| Low Power Mode | YES |
| External Data Bus Width | 8 |
| Data Rate (Max) | 5Mbps |
| Number of Serial I/Os | 2 |
| Data Transfer Rate-Max | 0.625 MBps |
| Communication Protocol | ASYNC, BIT |
| FIFO's | 16 Byte |
| With False Start Bit Detection | Yes |
| Height Seated (Max) | 4.7mm |
| Length | 52mm |
| Width | 15.24mm |
| RoHS Status | ROHS3 Compliant |
SC16C2550IN40,112 Overview
The package 40-DIP (0.600, 15.24mm) offers the best value.UART is possible to transmUART on 2, DUART channels.When UART comes to packaging, Tube is adopted as the packaging method.The type SERIAL IO/COMMUNICATION CONTROLLER, SERIAL is used for the uPs, uCs, and peripheral ICs on the board.In its configuration, 40 terminations are used.This device is powered by a voltage of 5V.As of right now, this electronic part is in a Obsolete status.There are 2 serial I/Os available for communication of data.Through Hole is a way to mount it.There is a voltage supply of 0 volts for the device.This electronic device is a type of 40-pin IC.IC clock frequency is set to 80MHz.UART is included under the subcategory of Serial IO/Communication Controllers as a result of a series of similarUARTies between UART and other similar entUARTies.Temperatures as high as 85°C can be reached by the device.In the case of 3.3/5V power supplies, it is reliable and efficient to use by electronic designers.Additionally, it is capable of performing ALSO OPERATES AT 2.5V MINIMUM SUPPLY.Basically, it uses SC16C2550 as its base part number.The device can be operated at temperatures as low as -40°C.
SC16C2550IN40,112 Features
2 serial I/Os
Clock frequency of 80MHz
Power supplies of 3.3/5V
ALSO OPERATES AT 2.5V MINIMUM SUPPLY
SC16C2550IN40,112 Applications
There are a lot of NXP USA Inc. SC16C2550IN40,112 UARTs applications.
- Wireless Infrared Data Communications Systems
- Communications equipment
- Ethernet Network to Serial Ports
- Ethernet Network Routers
- Infrared Transceivers
- GPS Devices
- Handheld Computers
- Portable Applications
- Handheld Terminal
- Factory automation and process control