SC16C2550IA44,518
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 44-LCC (J-Lead) |
| Surface Mount | YES |
| Packaging | Tape & Reel (TR) |
| Published | 2000 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 44 |
| Additional Feature | ALSO OPERATES AT 2.5V MINIMUM SUPPLY |
| HTS Code | 8542.31.00.01 |
| Technology | CMOS |
| Voltage - Supply | 2.5V 3.3V 5V |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Base Part Number | SC16C2550 |
| Pin Count | 44 |
| JESD-30 Code | S-PQCC-J44 |
| Qualification Status | Not Qualified |
| Operating Temperature (Max) | 85°C |
| Operating Temperature (Min) | -40°C |
| Temperature Grade | INDUSTRIAL |
| Number of Channels | 2, DUART |
| uPs/uCs/Peripheral ICs Type | SERIAL IO/COMMUNICATION CONTROLLER, SERIAL |
| Clock Frequency | 80MHz |
| Address Bus Width | 3 |
| Boundary Scan | NO |
| Low Power Mode | YES |
| External Data Bus Width | 8 |
| Data Rate (Max) | 5Mbps |
| Number of Serial I/Os | 2 |
| Data Transfer Rate-Max | 0.625 MBps |
| Communication Protocol | ASYNC, BIT |
| FIFO's | 16 Byte |
| With False Start Bit Detection | Yes |
| Height Seated (Max) | 4.57mm |
| Length | 16.585mm |
| Width | 16.585mm |
| RoHS Status | ROHS3 Compliant |
SC16C2550IA44,518 Overview
In addition, it is available in the cost-effective package 44-LCC (J-Lead).The transmission is conducted over 2, DUART channels.In terms of packaging, Tape & Reel (TR) is adopted.There is an uPs/uCs/Peripheral ICs type SERIAL IO/COMMUNICATION CONTROLLER, SERIAL which is used for it.A configuration of 44 terminations is used.In order to operate it, a supply voltage of 5V is required.In the present state, this electronic part is Obsolete.As a way to communicate data, the board has 2 serial I/Os.Mounting is done through Surface Mount.UART operates on a voltage of 2.5V 3.3V 5V.Electronic devices such as this are known as 44-pin integrated circuits.IC clock frequency is set to 80MHz.UART is able to operate at the maximum temperature of 85°C.Furthermore, it was shown to be capable of performing ALSO OPERATES AT 2.5V MINIMUM SUPPLY.A base part number of SC16C2550 is used for this product.Temperatures as low as -40°C are acceptable to it.
SC16C2550IA44,518 Features
2 serial I/Os
Clock frequency of 80MHz
ALSO OPERATES AT 2.5V MINIMUM SUPPLY
SC16C2550IA44,518 Applications
There are a lot of NXP USA Inc. SC16C2550IA44,518 UARTs applications.
- Cellular Phones DataPort
- Battery Operated Electronics
- Handheld Terminal
- Domestic Applications
- Ethernet Network Routers
- Personal Digital Assistants Modules
- Universal PCI Bus Add-in Card
- Router C ontrol
- Ethernet Network to Serial Ports
- White goods