Parameters |
Factory Lead Time |
18 Weeks |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
TO-236-3, SC-59, SOT-23-3 |
Number of Pins |
3 |
Operating Temperature |
-40°C~85°C TA |
Packaging |
Tape & Reel (TR) |
Published |
2008 |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
3 (168 Hours) |
Number of Terminations |
3 |
ECCN Code |
EAR99 |
Type |
Simple Reset/Power-On Reset |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
NOT SPECIFIED |
Number of Functions |
1 |
Supply Voltage |
3V |
Terminal Pitch |
0.95mm |
Time@Peak Reflow Temperature-Max (s) |
NOT SPECIFIED |
Output |
Open Drain or Open Collector |
Number of Channels |
1 |
Max Supply Voltage |
6V |
Min Supply Voltage |
900mV |
Nominal Supply Current |
3μA |
Adjustable Threshold |
NO |
Reset |
Active Low |
Voltage - Threshold |
1.8V |
Number of Voltages Monitored |
1 |
Reset Timeout |
143ms Minimum |
Length |
2.8955mm |
REACH SVHC |
Unknown |
RoHS Status |
ROHS3 Compliant |
RT9818C-18GV Overview
There are 3 terminals on this power management that allow it to be mounted. In terms of packaging, power management follows the Tape & Reel (TR) model. The purpose of this IC management is to provide you with a reference of 1 functions. It is possible to find on this power management a series of 1 channels. Please find attached TO-236-3, SC-59, SOT-23-3 functions for your reference in this IC power. This IC power shares lots of benefits with other Simple Reset/Power-On Reset products. Specifies a reflow peak temperature of NOT SPECIFIED for the package during reflow. During operation, the power ic is supplied with a voltage of 3V. During operation, the power ic is supplied with a voltage of 1. The mount is provided by Surface Mount. 3 pins are present on the power management system. Normally, the supply voltage (Vsup) for this PMIC should not be lower than 900mV. The maximum supply voltage (Vsup) in this PMIC should not exceed 6V volts. Surface Mount is the recommended mounting type. This range of temperature should be set for the supervisors: -40°C~85°C TA. During normal operation, this power managment ic can generate Open Drain or Open Collector of output voltage.
RT9818C-18GV Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 900mV
RT9818C-18GV Applications
There are a lot of Richtek USA Inc. RT9818C-18GV Voltage Supervisors applications.
- Smartphones
- DSP
- Stable power system
- Electronics installed in the vehicle
- Power distribution systems of ICU
- Power communication system
- Fire equipment power monitoring system
- Battery cars
- Data storage applications
- Solar power charger