QS3VH16212PAG8
| Parameters | |
|---|---|
| Output Characteristics | 3-STATE |
| Supply Type | Single |
| Output Polarity | TRUE |
| Logic IC Type | BUS EXCHANGER |
| High Level Output Current | -120mA |
| Propagation Delay (tpd) | 0.2 ns |
| Low Level Output Current | 120mA |
| Independent Circuits | 1 |
| Length | 14mm |
| Width | 6.1mm |
| Thickness | 1mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 7 Weeks |
| Mount | Surface Mount |
| Package / Case | TSSOP |
| Number of Pins | 56 |
| Packaging | Tape & Reel (TR) |
| Published | 2013 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 56 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Subcategory | Other Logic ICs |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 56 |
| Qualification Status | Not Qualified |
| Power Supplies | 2.5/3.3V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 2.3V |
| Number of Ports | 4 |
| Number of Bits | 12 |
| Quiescent Current | 1.5mA |
| Family | CB3Q/3VH/3C/2B |
QS3VH16212PAG8 Overview
As a means of saving space, digital switch is provided in the TSSOP.Tape & Reel (TR) is the method used for packaging.The basic configuration of this system includes 56 terminations.The turn signal switch is supplied with a voltage of 2.5V volts.This turn signal switch has a total of 56 component pins.As the end of conductors, it uses GULL WING.Its supply type is Single, which is used as the source of power.The board has 56 pins configured.The mounting is in the way of Surface Mount.There is a family of CB3Q/3VH/3C/2B members.In this signal multiplexer, there are 12 bits provided.In order for 2.5/3.3V to operate normally, a power supply is provided.In electronic terms, the digital switch ic is classified as Other Logic ICs.Without any external influences, it consumes 1.5mA current of multiplexer ic at all times.A resistance of 4 governs its operation.It is acceptable for this signal switch to operate at the maximal temperature of 85°C.In order to maintain a minimal operating temperature of the multiplexer, it should be set at -40°C.Device specifications specify 3.6V as the maximum supply voltage for the signal switches.The digital swith is specified to operate at the minimum supply voltage of 2.3V in compliance with the applicable device specification.It uses IC BUS EXCHANGER for its logic.
QS3VH16212PAG8 Features
Supplied in the TSSOP package
Adopting a supply type of Single
Power supplies of 2.5/3.3V
BUS EXCHANGER as the logic IC
QS3VH16212PAG8 Applications
There are a lot of Integrated Device Technology (IDT) QS3VH16212PAG8 Signal Switches / Multiplexers / Decoders applications.
- Combinational circuit
- Microprocessor memory systems
- Textile mills
- Steel plants
- Analog to digital conversion
- GLAN
- CNC machines
- CPU memory location identification
- Decimal decoder
- Enabling block of memory depending on address in memory chips