QS32390QG8
| Parameters | |
|---|---|
| Propagation Delay | 7.5 ns |
| Quiescent Current | 3μA |
| Logic Function | Demultiplexer, Multiplexer |
| Output Characteristics | 3-STATE WITH SERIES RESISTOR |
| Supply Type | Single |
| High Level Output Current | -120mA |
| Low Level Output Current | 120mA |
| Independent Circuits | 1 |
| Length | 9.9mm |
| Width | 3.8mm |
| Thickness | 1.47mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 7 Weeks |
| Mount | Surface Mount |
| Package / Case | QSOP |
| Number of Pins | 28 |
| Published | 2009 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Subcategory | Other Logic ICs |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 8 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.635mm |
| Pin Count | 28 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 5.25V |
| Min Supply Voltage | 4.75V |
| Number of Bits | 16 |
QS32390QG8 Overview
In order to save board space, digital switch is located in the QSOP.As part of its basic configuration, 28 terminations are designed as a part of it.The turn signal switch is supplied with a voltage of 5V volts.A component pin count of 28 can be found on this turn signal switch.As the end of conductors, it uses GULL WING.Its supply type is Single, which is used as the source of power.This multiplexer ic has 28 pins configured.The mounting is in the way of Surface Mount.In this signal multiplexer, there are 16 bits that are provided.In order to maintain mux switch's normal operation, power is provided to 5V.This is an the digital switch ic that is classified as Other Logic ICs.Not being affected by the external factors, consumes 3μA current of multiplexer ic.Supply voltages of 5V can provide reliable performance of the multiplexers.It is acceptable for this signal switch to operate at the maximal temperature of 85°C.In order to maintain a minimal operating temperature of the multiplexer, it should be set at -40°C.The signal switches is specified to operate at the maximum supply voltage of 5.25V in compliance with the applicable device specification.A minimum supply voltage of 4.75V is required to operate the digital swith.
QS32390QG8 Features
Supplied in the QSOP package
Adopting a supply type of Single
Power supplies of 5V
Operating with the supply voltage of 5V
QS32390QG8 Applications
There are a lot of Integrated Device Technology (IDT) QS32390QG8 Signal Switches / Multiplexers / Decoders applications.
- LVDS
- Decimal decoder
- Metal detectors
- Video transmission
- Frequency multiplexing system
- Electronics industry
- Audio transmission
- Telephone network
- High-performance memory-decoding applications
- Data-routing applications