PLL1700E
| Parameters | |
|---|---|
| Lifecycle Status | NRND (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SSOP (0.209, 5.30mm Width) |
| Number of Pins | 20 |
| Weight | 189.913455mg |
| Operating Temperature | -25°C~85°C |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Not For New Designs |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Type | PLL Multi-Clock Generator |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | ALSO REQUIRES 3.3V SUPPLY |
| Subcategory | Clock Generators |
| Voltage - Supply | 3.3V 5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Frequency | 27MHz |
| Base Part Number | PLL1700 |
| Output | CMOS |
| Pin Count | 20 |
| Number of Outputs | 6 |
| Operating Supply Voltage | 5V |
| Number of Elements | 2 |
| Number of Circuits | 1 |
| Nominal Supply Current | 16mA |
| Max Supply Current | 16mA |
| Frequency (Max) | 36.87MHz |
| Input | TTL |
| Ratio - Input:Output | 1:6 |
| Primary Clock/Crystal Frequency-Nom | 27MHz |
| PLL | Yes |
| Differential - Input:Output | Yes/No |
| Divider/Multiplier | No/No |
| Height | 2mm |
| Length | 7.2mm |
| Width | 5.3mm |
| Thickness | 1.95mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
PLL1700E Overview
In order to package it as a clock IC, the Tube package is used. Clock PLL is embedded in the 20-SSOP (0.209, 5.30mm Width) package. A maximum temperature of 260 can be sustained by this clock generator ic during reflowing. 20 terminations can be found in frequency synthesizer. The clock generator ic should be grounded with a voltage of 5V. In this clock generator, TTL is used as the input to the clock. To access the electronic component's full performance, 1 circuits are implemented. An upper frequency limit of 36.87MHz Max can be achieved with this clock-based frequency synthesizer. Because of the Surface Mount, clock PLL can be easily mounted on the panel. Clock PLL works with 3.3V 5V supply voltage provided. The temperature should be set at -25°C~85°C to ensure reliable performance. I would like to present to you a frequency synthesizer that is compatible with CMOS logic levels. This electronic component can be classified as a PLL Multi-Clock Generator. In particular, this clock PLL is designed to be used with microprocessors. The related electronic parts of part number PLL1700 are listed below. There are 20 pins on the frequency generator that are available for use. Clock PLL is capable of handling a voltage of 5V. This clock generator can be classified as a kind of Clock Generators in general. In order to provide better clock signal output, this frequency synthesizer is equipped with ALSO REQUIRES 3.3V SUPPLY. Clock PLL has 6 signal outputs to maximi6e output frequency. At frequencies of 27MHz, RF synthesizer achieves high efficiency. This is a 2-element clock generator with low jitter performance. In this RF synthesizer operation, 16mA of current are supplied.
PLL1700E Features
Available in the 20-SSOP (0.209, 5.30mm Width)
Supply voltage of 5V
Operating supply voltage of 5V
PLL1700E Applications
There are a lot of Texas Instruments PLL1700E Clock Generators applications.
- Broadcast communication
- Mobile telephones
- Time to digital converters
- Signal generator
- Melting
- Medical equipment
- Frequency synthesis
- Mixed mode (analog and digital) applications
- MRI
- Computers to manage memory cards