PKS606PN
| Parameters | |
|---|---|
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm), 7 Leads |
| Number of Pins | 7 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Published | 2006 |
| Series | PeakSwitch® |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Power (Watts) | 66W |
| HTS Code | 8542.39.00.01 |
| Power Rating | 660W |
| Max Power Dissipation | 66W |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Terminal Pitch | 2.54mm |
| Pin Count | 8 |
| JESD-30 Code | R-PDIP-T8 |
| Output Voltage | 15V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Nominal Supply Current | 1.175mA |
| Control Features | EN |
| Topology | Flyback |
| Output Current-Max | 1.62A |
| Frequency - Switching | 277kHz |
| Control Technique | PULSE WIDTH MODULATION |
| Switcher Configuration | SINGLE |
| Internal Switch(s) | Yes |
| Fault Protection | Current Limiting, Over Load, Over Temperature |
| Max Duty Cycle | 65 % |
| Max Supply Voltage (AC) | 265V |
| Output Isolation | Isolated |
| Voltage - Breakdown | 700V |
| Min Supply Voltage (AC) | 85V |
| Height | 3.68mm |
| Length | 9.83mm |
| Width | 6.6mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
PKS606PN Overview
There is a ac to dc converter embedded in package 8-DIP (0.300, 7.62mm), 7 Leads .The AC/DC power converter Tube is available for this product.A AC/DC converter of this type is mounted in the way of Through Hole .For the ac dc converter to perform properly, it should be operated at a temperature of -40°C~150°C TJ °C.In this AC DC converter, the analog IC type is SWITCHING CONTROLLER .At this point, the switching frequency reaches 277kHz .Total terminations are 8 .There are 7 pins on this ac/dc converter.A total of 8 pins are present on the ac-dc converter.The ac dc converters are suitable for mounting by Through Hole .A member of the PeakSwitch? manufacturer family, it has the following characteristics.This AC/DC converter produces a voltage of 15V as its output.It is possible to supply the ac to dc inverter with a maximum current of 1.62A .Across the converter, the minimum supply voltage is 85V .There is 265V maximum supply voltage across the converter.
PKS606PN Features
Packaged with 8-DIP (0.300, 7.62mm), 7 Leads
Switching Frequency at 277kHz
With 7 pins
PKS606PN Applications
There are a lot of Power Integrations PKS606PN AC DC Converters applications.
- Industrial controls
- Off--line Battery Charger
- MPS parts
- Universal Off-Line Power Supplies
- USB-PD 2.0
- Consumer electronics
- Battery Chargers
- Chargers for cell/cordless phones
- AC/DC Adaptors/Chargers for PDAs
- Wall switches