PKS604PN

PKS604PN

8 TerminationsAC to DC power converterPeakSwitch? Series 277kHz Min 85V VMax 265V V


  • Manufacturer: Power Integrations
  • Origchip NO: 633-PKS604PN
  • Package: 8-DIP (0.300, 7.62mm), 7 Leads
  • Datasheet: PDF
  • Stock: 719
  • Description: 8 TerminationsAC to DC power converterPeakSwitch? Series 277kHz Min 85V VMax 265V V(Kg)

Details

Tags

Parameters
Mounting Type Through Hole
Package / Case 8-DIP (0.300, 7.62mm), 7 Leads
Surface Mount NO
Operating Temperature -40°C~150°C TJ
Packaging Tube
Published 2007
Series PeakSwitch®
Part Status Obsolete
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 8
ECCN Code EAR99
Power (Watts) 56W
HTS Code 8542.39.00.01
Power Rating 23W
Max Power Dissipation 56W
Terminal Position DUAL
Number of Functions 1
Terminal Pitch 2.54mm
Pin Count 8
JESD-30 Code R-PDIP-T8
Output Voltage 12V
Analog IC - Other Type SWITCHING CONTROLLER
Nominal Supply Current 25μA
Control Features EN
Topology Flyback
Output Current-Max 1.55A
Frequency - Switching 277kHz
Control Technique PULSE WIDTH MODULATION
Switcher Configuration SINGLE
Internal Switch(s) Yes
Fault Protection Current Limiting, Over Load, Over Temperature
Max Duty Cycle 65 %
Max Supply Voltage (AC) 265V
Output Isolation Isolated
Voltage - Breakdown 700V
Min Supply Voltage (AC) 85V
Length 9.575mm
Width 7.62mm
Radiation Hardening No
RoHS Status RoHS Compliant
Lead Free Lead Free

PKS604PN Overview


The ac to dc converter is embedded in 8-DIP (0.300, 7.62mm), 7 Leads package.The AC/DC power converter is available in Tube .As you can see, this AC/DC converter is mounted in the way of Through Hole .It is necessary to operate the ac dc converter at a temperature of -40°C~150°C TJ °C in order for it to perform properly.This AC DC converter employs SWITCHING CONTROLLER analog IC type.The switching frequency reaches 277kHz .There are a total of 8 terminations.A total of 8 pins are present on the ac-dc converter.It belongs to the family of PeakSwitch? manufacturers.Its output voltage amounts to 12V .The maximum current that can be supplied to the ac to dc inverter is 1.55A .A minimum voltage supply across the converter is 85V .Across the converter, a maximum supply voltage of 265V may be applied.

PKS604PN Features


Packaged with 8-DIP (0.300, 7.62mm), 7 Leads
Switching Frequency at 277kHz

PKS604PN Applications


There are a lot of Power Integrations PKS604PN AC DC Converters applications.

  • Cleaners
  • Standby power supplies for VCR
  • AC?DC USB chargers for Tablets
  • AC/DC Adaptors/Chargers for E-books
  • Networking
  • Linear Adapter Replacements
  • Set Top Boxes (STB)
  • Industrial controls
  • Standby power
  • Home Appliance Applications

Write a review

Note: HTML is not translated!
    Bad           Good