PIC18LF26J13-I/SP
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Mounting Type | Through Hole |
| Package / Case | 28-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Number of Pins | 28 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2009 |
| Series | PIC® XLP™ 18J |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | Not Applicable |
| Number of Terminations | 28 |
| Terminal Finish | MATTE TIN |
| Subcategory | Microcontrollers |
| Max Power Dissipation | 1W |
| Technology | CMOS |
| Terminal Position | DUAL |
| Supply Voltage | 2.5V |
| Frequency | 48MHz |
| Base Part Number | PIC18LF26J13 |
| Pin Count | 28 |
| Interface | I2C, LIN, SPI, UART, USART |
| Memory Size | 64kB |
| Oscillator Type | Internal |
| Number of I/O | 22 |
| RAM Size | 3.8K x 8 |
| Voltage - Supply (Vcc/Vdd) | 2V~2.75V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER |
| Core Processor | PIC |
| Peripherals | Brown-out Detect/Reset, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 8-Bit |
| Program Memory Size | 64KB 32K x 16 |
| Connectivity | I2C, LINbus, SPI, UART/USART |
| Supply Current-Max | 15.1mA |
| Bit Size | 8 |
| Data Converter | A/D 10x10b/12b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | YES |
| Data Bus Width | 8b |
| PWM Channels | YES |
| Number of Timers/Counters | 8 |
| CPU Family | PIC |
| Number of Programmable I/O | 3 |
| Number of ADC Channels | 10 |
| Number of I2C Channels | 2 |
| Height | 3.81mm |
| Length | 35.56mm |
| Width | 8.509mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
PIC18LF26J13-I/SP Overview
For space savings, it is available in the 28-DIP (0.300, 7.62mm) package. Using Through Hole, it is mounted. It is available in the Tube package. There is a PIC as core processor in this device. Work should be performed at a temperature of -40°C~85°C TA. FLASH has been assigned to it as a program memory. There are 22 I/Os on it, which makes it a very simple device. Other components that are comparable to it have the base part number PIC18LF26J13. A DUAL position is assigned to its terminals. As far as terminations are concerned, there are 28 terminations present. There are a number of electrical components in the PIC? XLP? 18J series, including this one. Using the 2.5V supply voltage allows for high efficiency. As for the uPs/uCs/peripheral ICs, this gadget has MICROCONTROLLER. There are 28 pins used in the construction of this device. A total of 28 pins are attached to it. In the subcategory of Microcontrollers, this component is included. In the device, there is a memory capacity of 64kB which may be used to store programs and data. A maximum supply current of 15.1mA is set. It performs extremely well at a frequency of 48MHz. In total, there are 8 timers and counters. This part is part of the PIC family of CPUs. There are a total of 3 programmable I/Os available. Using an oscillator type of Internal, it works.
PIC18LF26J13-I/SP Features
28-DIP (0.300, 7.62mm) package
Mounting type of Through Hole
Microcontrollers subcategory
PIC18LF26J13-I/SP Applications
There are a lot of Microchip Technology PIC18LF26J13-I/SP Microcontroller applications.
- Blenders
- Vacuum cleaners
- Microwave ovens
- Paper shredders
- Coffee machines
- DDC control
- Hand-held metering systems
- Electronic jamming systems
- Dialysis machines (performs function of liver)
- Computed Tomography (CT scan)