PIC18LF2510-I/SP
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 28-DIP (0.300, 7.62mm) |
| Number of Pins | 28 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2005 |
| Series | PIC® 18F |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| ECCN Code | 3A991.A.2 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Microcontrollers |
| Max Power Dissipation | 1W |
| Technology | CMOS |
| Terminal Position | DUAL |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Frequency | 40MHz |
| Base Part Number | PIC18LF2510 |
| Pin Count | 28 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 2/5.5V |
| Interface | I2C, SPI, UART, USART |
| Memory Size | 32kB |
| Oscillator Type | Internal |
| Number of I/O | 25 |
| RAM Size | 1.5K x 8 |
| Voltage - Supply (Vcc/Vdd) | 2V~5.5V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER |
| Core Processor | PIC |
| Peripherals | Brown-out Detect/Reset, HLVD, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 8-Bit |
| Program Memory Size | 32KB 16K x 16 |
| Connectivity | I2C, SPI, UART/USART |
| Bit Size | 8 |
| Data Converter | A/D 10x10b |
| Watchdog Timer | Yes |
| Access Time | 40 μs |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 8b |
| PWM Channels | YES |
| DAC Channels | NO |
| Number of Timers/Counters | 4 |
| On Chip Program ROM Width | 16 |
| CPU Family | PIC |
| Height Seated (Max) | 5.08mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
PIC18LF2510-I/SP Overview
A space-saving advantage is that it is included in the 28-DIP (0.300, 7.62mm) package. Through Hole is used for mounting. It is available in the Tube package. A PIC core processor powers the device. Work should be done at -40°C~85°C TA. In terms of its program memory type, it is FLASH. A total of 25 I/Os are present. A component with the same part number as PIC18LF2510 can be compared to other similar components. DUAL is the position of its terminals on the board. There are a total of 28 terminations in it. In the PIC? 18F series, this electrical component is found. As a result of the 5V supply voltage, high efficiency is possible. This gadget has MICROCONTROLLER as its uPs/uCs/Peripheral IC. The structure is composed of 28 pins. It is mounted based on the method of Through Hole. It has a total of 28 pins on it. This is a component included in Microcontrollers. Memory size for the devices is 32kB, which can be used to store programs and data. A 2/5.5V source is used for powering it. This device achieves excellent efficiency at frequencies of 40MHz. 4 timer/counters are present. This part is an integral part of the PIC CPU family. Using an oscillator type of Internal, it works.
PIC18LF2510-I/SP Features
28-DIP (0.300, 7.62mm) package
Mounting type of Through Hole
Microcontrollers subcategory
PIC18LF2510-I/SP Applications
There are a lot of Microchip Technology PIC18LF2510-I/SP Microcontroller applications.
- Switches
- Toasters
- Pacemakers (used to control abnormal heart rhythm)
- Wastewater treatment
- Blenders
- Smart instruments
- Xbox
- Smart highways (navigation, traffic control, information monitoring and car service)
- Hand-held metering systems
- Smoke alarms