PIC18F4585-E/PT
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 44-TQFP |
| Number of Pins | 44 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tray |
| Published | 2007 |
| Series | PIC® 18F |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 44 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Microcontrollers |
| Max Power Dissipation | 1W |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.8mm |
| Frequency | 40MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | PIC18F4585 |
| Pin Count | 44 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 5V |
| Interface | CAN, I2C, SPI, UART, USART |
| Memory Size | 48kB |
| Oscillator Type | Internal |
| Number of I/O | 36 |
| RAM Size | 3.25K x 8 |
| Voltage - Supply (Vcc/Vdd) | 4.2V~5.5V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | PIC |
| Peripherals | Brown-out Detect/Reset, HLVD, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 8-Bit |
| Program Memory Size | 48KB 24K x 16 |
| Connectivity | CANbus, I2C, SPI, UART/USART |
| Bit Size | 8 |
| Data Converter | A/D 11x10b |
| Watchdog Timer | Yes |
| Access Time | 40 μs |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 8b |
| PWM Channels | YES |
| Number of Timers/Counters | 4 |
| EEPROM Size | 1K x 8 |
| CPU Family | PIC |
| Number of ADC Channels | 11 |
| Number of I2C Channels | 1 |
| Height | 1.05mm |
| Length | 10mm |
| Width | 10mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
PIC18F4585-E/PT Overview
It is available in the 44-TQFP package for the benefit of saving space. A Surface Mount mounting method is used. This item can be found in package Tray. Devices with PIC core processors are available. Working at -40°C~125°C TA temperature is recommended. There is FLASH program memory in it. The device has 36 I/Os. A component with the same part number as PIC18F4585 can be compared to other similar components. At QUAD, it has its terminals. Currently, it consists of 44 terminationals. There are a number of electrical components in the PIC? 18F series, including this one. It is possible to achieve high efficiency with a 5V supply voltage. As for the uPs/uCs/peripheral ICs, this gadget has MICROCONTROLLER, RISC. A total of 44 pins are used in its construction. The method of Surface Mount is used to mount it. This device has a total of 44 pins. This component is a part of Microcontrollers. The devices have a maximum memory size of 48kB that can be used to store programs and data. A 5V source is used for powering it. It is highly efficient when it works at a frequency of 40MHz. The number of timers and counters is 4. This part is an integral part of the PIC CPU family. Internal is the oscillator type it uses.
PIC18F4585-E/PT Features
44-TQFP package
Mounting type of Surface Mount
Microcontrollers subcategory
PIC18F4585-E/PT Applications
There are a lot of Microchip Technology PIC18F4585-E/PT Microcontroller applications.
- Data acquisition and control
- Smart highways (navigation, traffic control, information monitoring and car service)
- Light sensing & controlling devices
- Hard drives
- Nintendo
- Magnetic resonance imaging (MRI)
- Computed Tomography (CT scan)
- Process control devices
- DCS control intelligent sensor
- Hearing aids