PIC16LF1508-I/SS
| Parameters | |
|---|---|
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | PIC |
| Peripherals | Brown-out Detect/Reset, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 8-Bit |
| Program Memory Size | 7KB 4K x 14 |
| Connectivity | I2C, LINbus, SPI, UART/USART |
| Bit Size | 8 |
| Data Converter | A/D 12x10b; D/A 1x5b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 8b |
| Number of Timers/Counters | 3 |
| Address Bus Width | 8b |
| CPU Family | PIC |
| Number of ADC Channels | 12 |
| Number of PWM Channels | 4 |
| Number of I2C Channels | 1 |
| Height | 1.85mm |
| Length | 7.5mm |
| Width | 5.6mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 8 Weeks |
| Mounting Type | Surface Mount |
| Package / Case | 20-SSOP (0.209, 5.30mm Width) |
| Surface Mount | YES |
| Number of Pins | 20 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2005 |
| Series | PIC® XLP™ 16F |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Microcontrollers |
| Max Power Dissipation | 800mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Frequency | 20MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | PIC16LF1508 |
| Pin Count | 20 |
| Supply Voltage-Min (Vsup) | 2.5V |
| Interface | I2C, LIN, SPI, UART, USART |
| Memory Size | 7kB |
| Oscillator Type | Internal |
| Number of I/O | 17 |
| Nominal Supply Current | 120μA |
| RAM Size | 256 x 8 |
| Voltage - Supply (Vcc/Vdd) | 1.8V~3.6V |
PIC16LF1508-I/SS Overview
To save space, it is included in the 20-SSOP (0.209, 5.30mm Width) package. The way of Surface Mount is used to mount it. You can find it in the package of Tube. A PIC core processor powers the device. In order to work effectively, the temperature should be kept at -40°C~85°C TA. Memory type FLASH is used for program memory. There are 17 I/Os on the board. In order to find similar components, it has a base part number of PIC16LF1508. The terminals of this device are located at DUAL. A 20 termination is contained within it. PIC? XLP? 16F is the series number of this electrical component. As a result of the 3.3V supply voltage, high efficiency is possible. MICROCONTROLLER, RISC is the uPs/uCs/Peripheral IC chip in this gadget. A number of 20 pins are used to construct it. This device has a total of 20 pins. It falls under the category of Microcontrollers. Using the devices' 7kB memory size, you can store programs and data. Using a frequency of 20MHz, it is very efficient. There are 3 timers/counters. CPU family PIC comprises the part. Normal operation requires a supply voltage (Vsup) that is higher than 2.5V. It works with an oscillator type Internal.
PIC16LF1508-I/SS Features
20-SSOP (0.209, 5.30mm Width) package
Mounting type of Surface Mount
Microcontrollers subcategory
PIC16LF1508-I/SS Applications
There are a lot of Microchip Technology PIC16LF1508-I/SS Microcontroller applications.
- Fire detection & safety devices
- Oscilloscopes
- Electronic jamming systems
- Broadband technology, video and voice processing
- Smartphone
- Smart highways (navigation, traffic control, information monitoring and car service)
- Walkie talkies
- Telephone sets
- Home appliances
- Embedded gateways