PIC16F616-E/ML
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-VQFN Exposed Pad |
| Number of Pins | 16 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tube |
| Published | 2006 |
| Series | PIC® 16F |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | ALSO OPERATES AT 2 V MINIMUM SUPPLY AT 8 MHZ |
| Subcategory | Microcontrollers |
| Max Power Dissipation | 800mW |
| Technology | CMOS |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Frequency | 20MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | PIC16F616 |
| Pin Count | 16 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 2/5.5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Interface | RS-232, USB |
| Memory Size | 3.5kB |
| Oscillator Type | Internal |
| Number of I/O | 11 |
| RAM Size | 128 x 8 |
| Voltage - Supply (Vcc/Vdd) | 2V~5.5V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | PIC |
| Peripherals | Brown-out Detect/Reset, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 8-Bit |
| Program Memory Size | 3.5KB 2K x 14 |
| Bit Size | 8 |
| Data Converter | A/D 8x10b |
| Watchdog Timer | Yes |
| Access Time | 20 μs |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 8b |
| PWM Channels | YES |
| DAC Channels | NO |
| Number of Timers/Counters | 3 |
| ROM (words) | 2048 |
| On Chip Program ROM Width | 14 |
| CPU Family | PIC |
| Height Seated (Max) | 1mm |
| Length | 4mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
PIC16F616-E/ML Overview
Due to its space-saving qualities, it is available in the 16-VQFN Exposed Pad package. Surface Mount is used for mounting. It comes in a Tube package. Devices with PIC core processors are available. In order to work effectively, the temperature should be kept at -40°C~125°C TA. FLASH is the type of program memory used by it. The device has 11 I/Os. Other components that are comparable to it have the base part number PIC16F616. A QUAD position is assigned to its terminals. A 16 termination is contained within it. In the PIC? 16F series, this electrical component is found. It is possible to achieve high efficiency with a 5V supply voltage. This gadget has MICROCONTROLLER, RISC as its uPs/uCs/Peripheral IC. A total of 16 pins are required to construct this device. The mounting of this device is carried out following the method of Surface Mount. There are a total of 16 pins on it. This is a component included in Microcontrollers. Data and programs can be stored on the devices with a memory size of 3.5kB. It is powered by a 2/5.5V?source. It performs extremely well at a frequency of 20MHz. In total, there are 3 timers and counters. It is part of the PIC CPU family. The property of ALSO OPERATES AT 2 V MINIMUM SUPPLY AT 8 MHZ is also possessed by it. Normal operation requires a supply voltage (Vsup) that is higher than 4.5V. An oscillator of type Internal is used.
PIC16F616-E/ML Features
16-VQFN Exposed Pad package
Mounting type of Surface Mount
Microcontrollers subcategory
PIC16F616-E/ML Applications
There are a lot of Microchip Technology PIC16F616-E/ML Microcontroller applications.
- Embedded gateways
- Guidance-GPS
- Dishwashers
- Automatic control
- Accu-check
- Microwave ovens
- Microwave ovens
- Playstation
- Fire alarms
- Wastewater treatment