PIC16F54T-I/SO
| Parameters | |
|---|---|
| Factory Lead Time | 7 Weeks |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 18-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 18 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2007 |
| Series | PIC® 16F |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 18 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | OPERATES AT 2 V MINIMUM SUPPLY @ 4 MHZ |
| Subcategory | Microcontrollers |
| Max Power Dissipation | 800mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3V |
| Frequency | 20MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | PIC16F54 |
| Pin Count | 18 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 2/5.5V |
| Supply Voltage-Min (Vsup) | 2V |
| Memory Size | 768B |
| Oscillator Type | External |
| Number of I/O | 12 |
| RAM Size | 25 x 8 |
| Voltage - Supply (Vcc/Vdd) | 2V~5.5V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | PIC |
| Peripherals | POR, WDT |
| Program Memory Type | FLASH |
| Core Size | 8-Bit |
| Program Memory Size | 768B 512 x 12 |
| Supply Current-Max | 7mA |
| Bit Size | 8 |
| Watchdog Timer | Yes |
| Access Time | 20 μs |
| Has ADC | NO |
| DMA Channels | NO |
| Data Bus Width | 8b |
| PWM Channels | NO |
| DAC Channels | NO |
| Number of Timers/Counters | 1 |
| ROM (words) | 512 |
| On Chip Program ROM Width | 12 |
| CPU Family | PIC |
| Height Seated (Max) | 2.64mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
PIC16F54T-I/SO Overview
Due to the benefits of saving space, it is available in the 18-SOIC (0.295, 7.50mm Width) package. A Surface Mount mounting method is used. There is a Tape & Reel (TR) package available for it. A core processor of PIC is present in the device. Working at -40°C~85°C TA temperature is recommended. The type of memory it uses is FLASH. There are 12 I/Os on it. A comparable component can be found by using the base part number PIC16F54. At DUAL, its terminals are located. A 18 termination is contained within it. The PIC? 16F series includes this electrical component. It is possible to achieve high efficiency with a 3V supply voltage. UPs/UCS/Peripheral ICs of this gadget are MICROCONTROLLER, RISC in order to monitor their performance. A number of 18 pins are used to construct it. Mounting is performed in accordance with Surface Mount. There are 18 pins on it. This is a component included in Microcontrollers. Data and programs can be stored on the devices with a memory size of 768B. It is important to note that the maximum supply current is 7mA. Power is provided by a source of 2/5.5V. Working at a frequency of 20MHz results in excellent efficiency. 1 timer/counters are present. As part of the PIC CPU family, this component is included. OPERATES AT 2 V MINIMUM SUPPLY @ 4 MHZ also belongs to it. Normal operation requires a supply voltage (Vsup) that is higher than 2V. An oscillator type External is required for it to work.
PIC16F54T-I/SO Features
18-SOIC (0.295, 7.50mm Width) package
Mounting type of Surface Mount
Microcontrollers subcategory
PIC16F54T-I/SO Applications
There are a lot of Microchip Technology PIC16F54T-I/SO Microcontroller applications.
- Routers
- Ipod
- Instrument control
- X-ray
- Mice
- Security systems
- Hand-held metering systems
- Data acquisition and control
- Toys
- DCS control intelligent sensor