PIC12F508-E/P
| Parameters | |
|---|---|
| Factory Lead Time | 5 Weeks |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tube |
| Published | 1999 |
| Series | PIC® 12F |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | Not Applicable |
| Number of Terminations | 8 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Microcontrollers |
| Max Power Dissipation | 800mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Supply Voltage | 2.5V |
| Frequency | 4MHz |
| Base Part Number | PIC12F508 |
| Pin Count | 8 |
| Supply Voltage-Max (Vsup) | 3V |
| Supply Voltage-Min (Vsup) | 2V |
| Interface | RS-232, USB |
| Memory Size | 768B |
| Oscillator Type | Internal |
| Number of I/O | 5 |
| RAM Size | 25 x 8 |
| Voltage - Supply (Vcc/Vdd) | 2V~5.5V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | PIC |
| Peripherals | POR, WDT |
| Program Memory Type | FLASH |
| Core Size | 8-Bit |
| Program Memory Size | 768B 512 x 12 |
| Bit Size | 8 |
| Watchdog Timer | Yes |
| Access Time | 4 μs |
| Has ADC | NO |
| DMA Channels | NO |
| Data Bus Width | 8b |
| PWM Channels | NO |
| DAC Channels | NO |
| Number of Timers/Counters | 1 |
| ROM (words) | 512 |
| On Chip Program ROM Width | 12 |
| CPU Family | PIC |
| Number of Programmable I/O | 6 |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
PIC12F508-E/P Overview
Due to its space-saving qualities, it is available in the 8-DIP (0.300, 7.62mm) package. In this case, it is mounted using the method of Through Hole. It comes in the package?of a Tube. With a processor of PIC cores, the device is powered. Work should be performed at a temperature of -40°C~125°C TA. In terms of its program memory type, it is FLASH. There are 5 I/Os on it. A component with the same part number as PIC12F508 can be compared to other similar components. DUAL is the position of its terminals on the board. In this case, there are 8 terminationals. In the PIC? 12F series, this electrical component is found. High efficiency is possible due to the 2.5V supply voltage. It has uPs/uCs/Peripheral IC - MICROCONTROLLER, RISC. A total of 8 pins are required to construct this device. This mount is done in accordance with the method of Through Hole. There are a total of 8 pins on it. It falls under the category of Microcontrollers. The devices have a memory size of 768B that can be used to store programs and data. This device achieves excellent efficiency at frequencies of 4MHz. 1 timers/counters are in use. This part is part of the PIC family of CPUs. There are a total of 6 programmable I/Os. Normal operation requires a supply voltage (Vsup) that is higher than 2V. Using an oscillator type of Internal, it works.
PIC12F508-E/P Features
8-DIP (0.300, 7.62mm) package
Mounting type of Through Hole
Microcontrollers subcategory
PIC12F508-E/P Applications
There are a lot of Microchip Technology PIC12F508-E/P Microcontroller applications.
- Smoke alarms
- Removable disks
- Copiers
- Kindle
- Safety -airbags, automatic braking system (ABS)
- Mobile computers
- Hard drives
- Multi-meter
- Volt meter
- Medical instruments chromatographs