PCM2904DBR
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 28-SSOP (0.209, 5.30mm Width) |
| Number of Pins | 28 |
| Weight | 285.791543mg |
| Operating Temperature | -25°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| Type | Stereo Audio |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Other Consumer ICs |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 0.65mm |
| Base Part Number | PCM2904 |
| Pin Count | 28 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Interface | Serial, USB |
| Max Supply Voltage | 5.25V |
| Min Supply Voltage | 3.25V |
| Nominal Supply Current | 67mA |
| Data Interface | USB |
| Sampling Rate | 48 ksps |
| Voltage - Supply, Analog | 4.35V~5.25V |
| Voltage - Supply, Digital | 4.35V~5.25V |
| Number of A/D Converters | 1 |
| Signal to Noise Ratio (SNR) | 89 dB |
| Resolution (Bits) | 16 b |
| Sigma Delta | Yes |
| Number of ADCs / DACs | 2 / 2 |
| Dynamic Range, ADCs / DACs (db) Typ | 89 / 93 |
| S/N Ratio, ADCs / DACs (db) Typ | 89 / 96 |
| Number of Analog Outputs | 2 |
| Height | 2mm |
| Length | 10.2mm |
| Width | 5.3mm |
| Thickness | 1.95mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
PCM2904DBR Overview
Space-saving is achieved by supplying it in the 28-SSOP (0.209, 5.30mm Width) package. Packaging is done in the form of a Tape & Reel (TR). In the various applications in which this electronic part is used, it is capable of delivering a high level of efficiency as a type of Stereo Audio. It uses a mounting type of Surface Mount. Using -25°C~85°C as the operating performance allows it to operate normally. 2 / 2 ADC / DAC is integrated into it. Supply voltage is 4.35V~5.25V for the analog circuit. There is a supply voltage of 4.35V~5.25V provided to the digital circuit. Signals are prevented from reflecting off the transmission line's terminations by using 28 terminations. The device has a 28-pin configuration. 28 pins are connected to it. The base part number PCM2904 can be used to find related parts. On a PCB based on Surface Mount technology, it is mounted. 5.25V should be the maximum value of the supply voltage. To convert analog signals into digital signals, there are 1 A/D converters. There is subcategory Other Consumer ICs for this electronic part. A minimum supply voltage of 3.25V should be maintained. A power supply of 5V is required for operation. It can be operated from a voltage of 5V. At any given time, the circuit is expected to have a current of 67mA. The device is equipped with 2 analog outputs.
PCM2904DBR Features
Embedded in the 28-SSOP (0.209, 5.30mm Width) package
Operating temperature of -25°C~85°C
2 / 2 ADCs / DACs
1 A/D converters
2 analog outputs
PCM2904DBR Applications
There are a lot of Texas Instruments PCM2904DBR CODECs Interface ICs applications.
- Ships navigation
- Digital systems
- Data transfer
- Position measurement
- Textiles
- Robotic arm positioning
- Electronic circuits
- Wind turbines
- Mobile equipement
- CPU memory location identification