PCM2902EG4
| Parameters | |
|---|---|
| Supply Current-Max | 67mA |
| Data Interface | USB |
| Sampling Rate | 48 ksps |
| Voltage - Supply, Analog | 4.35V~5.25V |
| Voltage - Supply, Digital | 4.35V~5.25V |
| Number of A/D Converters | 1 |
| Signal to Noise Ratio (SNR) | 96 dB |
| Number of ADC Channels | 2 |
| Resolution (Bits) | 16 b |
| Sigma Delta | Yes |
| Number of ADCs / DACs | 2 / 2 |
| Dynamic Range, ADCs / DACs (db) Typ | 89 / 93 |
| S/N Ratio, ADCs / DACs (db) Typ | 89 / 96 |
| Height | 2mm |
| Length | 10.2mm |
| Width | 5.3mm |
| Thickness | 1.95mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Lifecycle Status | NRND (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 28-SSOP (0.209, 5.30mm Width) |
| Number of Pins | 28 |
| Weight | 285.791543mg |
| Operating Temperature | -25°C~85°C |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Not For New Designs |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| Type | Stereo Audio |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Other Consumer ICs |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 0.65mm |
| Base Part Number | PCM2902 |
| Pin Count | 28 |
| Power Supplies | 5V |
| Number of Channels | 4 |
| Interface | Serial, USB |
| Max Supply Voltage | 5.25V |
| Min Supply Voltage | 3.25V |
| Number of Bits | 16 |
PCM2902EG4 Overview
As a space saver, it comes in the 28-SSOP (0.209, 5.30mm Width) package. It is adopted to package in the Tube way. Due to the fact that this part is of the type Stereo Audio, it is capable of delivering high-efficiency performance in a wide range of applications. The mounting type of this device is Surface Mount. At -25°C~85°C, it can operate normally. The board is integrated with 2 / 2 ADCs and DACs. 4.35V~5.25V of supply voltage are applied to the analog circuit. 4.35V~5.25V is the supply voltage for the digital circuit. The transmission line is terminated with 28 terminations to prevent reflection of signals. In electronic terms, it is a kind of 28-pin device. It has a configuration of 28 pins. Its base part number PCM2902 can be used to find more related parts. On a PCB based on Surface Mount technology, it is mounted. 5.25V should be the maximum value of the supply voltage. Analog signals are converted to digital signals by means of 1 A/D converters. Electronic parts classified as Other Consumer ICs are located in this subcategory. A minimum supply voltage of 3.25V should be maintained. A power supply of 5V is required for operation. Data transmission is handled by 4 channels. To store information, there are 16 bits available. Their operation is made easier by a supply current below 67mA. In this ADC, there are 2 channels, which represent the number of analog values that can be read at once.
PCM2902EG4 Features
Embedded in the 28-SSOP (0.209, 5.30mm Width) package
Operating temperature of -25°C~85°C
2 / 2 ADCs / DACs
1 A/D converters
PCM2902EG4 Applications
There are a lot of Texas Instruments PCM2902EG4 CODECs Interface ICs applications.
- Digital systems
- Spooling or level wind
- Packaging
- Mobile equipement
- Autonomous vehicles & robots
- High-performance memory systems
- Pulp & paper mills
- Aerospace
- Translating the decimal values to the binary
- Wire number reduction in application that have multiple inputs