PCM2902BDBR
| Parameters | |
|---|---|
| Lifecycle Status | NRND (Last Updated: 6 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 28-SSOP (0.209, 5.30mm Width) |
| Number of Pins | 28 |
| Weight | 285.791543mg |
| Operating Temperature | -25°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Not For New Designs |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| Type | Stereo Audio |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Other Consumer ICs |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 0.65mm |
| Base Part Number | PCM2902 |
| Pin Count | 28 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Interface | Serial, USB |
| Max Supply Voltage | 5.25V |
| Min Supply Voltage | 4.35V |
| Supply Current-Max | 67mA |
| Data Interface | USB |
| Sampling Rate | 48 ksps |
| Voltage - Supply, Analog | 4.35V~5.25V |
| Voltage - Supply, Digital | 4.35V~5.25V |
| Number of A/D Converters | 1 |
| Signal to Noise Ratio (SNR) | 89 dB |
| Resolution (Bits) | 16 b |
| Sigma Delta | Yes |
| Number of ADCs / DACs | 2 / 2 |
| Dynamic Range, ADCs / DACs (db) Typ | 89 / 93 |
| S/N Ratio, ADCs / DACs (db) Typ | 89 / 96 |
| Height | 2mm |
| Length | 10.2mm |
| Width | 5.3mm |
| Thickness | 1.95mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
PCM2902BDBR Overview
Space-saving is achieved by supplying it in the 28-SSOP (0.209, 5.30mm Width) package. Tape & Reel (TR) packaging method is used. Due to the fact that this part is of the type Stereo Audio, it is capable of delivering high-efficiency performance in a wide range of applications. Surface Mount is the mounting type employed by this device. When the operating performance is set to -25°C~85°C, it is able to operate normally. 2 / 2 ADCs and DACs are integrated into it. Supply voltage is 4.35V~5.25V for the analog circuit. A supply voltage of 4.35V~5.25V is applied to the digital circuit. To prevent signals from reflecting off of the transmission line, there are 28 terminations. This is a 28-pin electronic device. The board is configured with 28 pins. By using its base part number PCM2902, you can find more related parts. This device is mounted on a PCB which uses the Surface Mount technology. 5.25V should be the maximum value of the supply voltage. Analog signals are converted into digital signals using 1 A/D converters. This electronic part is classified into the subcategory of Other Consumer ICs. Maintaining a minimum voltage of 4.35V is recommended. Power supplies of 5V are required to operate it. It can be operated from a voltage of 5V. It's easy to operate them when the supply current is kept below 67mA.
PCM2902BDBR Features
Embedded in the 28-SSOP (0.209, 5.30mm Width) package
Operating temperature of -25°C~85°C
2 / 2 ADCs / DACs
1 A/D converters
PCM2902BDBR Applications
There are a lot of Texas Instruments PCM2902BDBR CODECs Interface ICs applications.
- Data transfer
- Semiconductor fabrication
- Counting applications
- Wire number reduction in application that have multiple inputs
- Missing value imputation
- Stagecraft
- Spooling or level wind
- Anomaly detection
- Food & beverage
- Material handling