PCM2900BDBR
| Parameters | |
|---|---|
| Lifecycle Status | NRND (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 28-SSOP (0.209, 5.30mm Width) |
| Number of Pins | 28 |
| Weight | 289.987272mg |
| Operating Temperature | -25°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Not For New Designs |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| Type | Stereo Audio |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Other Consumer ICs |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 0.65mm |
| Base Part Number | PCM2900 |
| Pin Count | 28 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Interface | Serial, USB |
| Max Supply Voltage | 5.25V |
| Min Supply Voltage | 4.35V |
| Supply Current-Max | 67mA |
| Data Interface | USB |
| Sampling Rate | 48 ksps |
| Voltage - Supply, Analog | 4.35V~5.25V |
| Voltage - Supply, Digital | 4.35V~5.25V |
| Number of A/D Converters | 1 |
| Signal to Noise Ratio (SNR) | 89 dB |
| Resolution (Bits) | 8 b |
| Sigma Delta | Yes |
| Number of ADCs / DACs | 1 / 1 |
| Dynamic Range, ADCs / DACs (db) Typ | 89 / 93 |
| S/N Ratio, ADCs / DACs (db) Typ | 89 / 96 |
| Height | 2mm |
| Length | 10.2mm |
| Width | 5.3mm |
| Thickness | 1.95mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
PCM2900BDBR Overview
Space-saving is achieved by supplying it in the 28-SSOP (0.209, 5.30mm Width) package. It is adopted to package in the manner of Tape & Reel (TR). This electronic component is of the type Stereo Audio, allowing it to provide high-efficiency performance in various applications. It employs Surface Mount as its mounting type. When the operating performance is set to -25°C~85°C, it is able to operate normally. Integrated ADCs / DACs are available in 1 / 1. There is a voltage supply of 4.35V~5.25V to the analog circuit. 4.35V~5.25V provides the supply voltage to the digital circuit. Signals are prevented from reflecting off the end of transmission lines by 28 terminations. In terms of electronics, it is a 28-pin device. 28 pins are connected to it. Its base part number PCM2900 can be used to find other parts that are related. On a PCB based on Surface Mount technology, it is mounted. 5.25V should be the maximum value of the supply voltage. To convert analog signals into digital signals, there are 1 A/D converters. The electronic part has been classified as Other Consumer ICs. At a minimum, the voltage should be kept at 4.35V. A power supply of 5V is required for operation. Powered by a 5V supply voltage, it can run. It is easy to operate them since the supply current is kept below 67mA.
PCM2900BDBR Features
Embedded in the 28-SSOP (0.209, 5.30mm Width) package
Operating temperature of -25°C~85°C
1 / 1 ADCs / DACs
1 A/D converters
PCM2900BDBR Applications
There are a lot of Texas Instruments PCM2900BDBR CODECs Interface ICs applications.
- Textiles
- Robotics
- Cut-to-length
- Radiation therapy
- Pulp & paper mills
- Timber products
- Feature extraction
- High-performance memory system
- Full adders
- Addition