PALCE16V8H-15JC/4
| Parameters | |
|---|---|
| Package / Case | PLCC |
| Surface Mount | YES |
| JESD-609 Code | e0 |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Pin Count | 20 |
| JESD-30 Code | S-PQCC-J20 |
| Number of Outputs | 8 |
| Qualification Status | Not Qualified |
| Operating Temperature (Max) | 75°C |
| Supply Voltage-Max (Vsup) | 5.25V |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL EXTENDED |
| Supply Voltage-Min (Vsup) | 4.75V |
| Number of I/O | 8 |
| Clock Frequency | 45.5MHz |
| Propagation Delay | 15 ns |
| Architecture | PAL-TYPE |
| Number of Inputs | 18 |
| Programmable Logic Type | EE PLD |
| Number of Gates | 200 |
| Output Function | MACROCELL |
| Number of Macro Cells | 8 |
| Number of Dedicated Inputs | 8 |
| Number of Product Terms | 64 |
| Height Seated (Max) | 4.572mm |
| RoHS Status | RoHS Compliant |
PALCE16V8H-15JC/4 Overview
8 macrocells are present in the mobile phone network, which offer radio coverage from a high-power cell tower, antenna, or mast.It is part of the PLCC package.There are 8 I/Os programmed in it.There are 20 terminations programmed into the device.This electrical part has a terminal position of QUADand is connected to the ground.It is powered from a supply voltage of 5V.The part belongs to Programmable Logic Devices family.There are 20pins on the chip.It is possible to construct digital circuits using 200gates, which are devices that serve as building blocks.It operates from 5V power supplies.There is a maximum supply voltage (Vsup) of 5.25V.A total of 8dedicated inputs are available for the purpose of detecting input signals.It is important that the supply voltage (Vsup) exceeds 4.75VV.The clock frequency should not exceed 45.5MHz.Programmable logic types can be divided into EE PLD.The output configuration is set to [0].It is equipped with 64 product terms.It is recommended that the operating temperature remain below 75°C.There are 18 inputs on the device.
PALCE16V8H-15JC/4 Features
PLCC package
8 I/Os
20 pin count
5V power supplies
8 outputs
PALCE16V8H-15JC/4 Applications
There are a lot of Lattice Semiconductor PALCE16V8H-15JC/4 CPLDs applications.
- Multiple Clock Source Selection
- I2C BUS INTERFACE
- D/T registers and latches
- Parity generators
- Complex programmable logic devices
- PULSE WIDTH MODULATION (PWM)
- ROM patching
- State machine control
- POWER-SAVING MODES
- Synchronous or asynchronous mode