P5040NSE72QC
| Parameters | |
|---|---|
| External Data Bus Width | 64 |
| Format | FIXED POINT |
| Integrated Cache | YES |
| Voltage - I/O | 1.0V 1.2V |
| Ethernet | 1Gbps (10), 10Gbps (2) |
| Number of Cores/Bus Width | 4 Core 64-Bit |
| Graphics Acceleration | No |
| RAM Controllers | DDR3, DDR3L |
| USB | USB 2.0 + PHY (2) |
| Additional Interfaces | I2C, MMC/SD, PCIe, SPI, UART |
| Security Features | Boot Security, Cryptography, Secure Fusebox, Secure Debug, Tamper Detection, Volatile key Storage |
| SATA | SATA 3Gbps (2) |
| Height Seated (Max) | 3.53mm |
| Length | 37.5mm |
| RoHS Status | ROHS3 Compliant |
| Factory Lead Time | 12 Weeks |
| Package / Case | 1295-BBGA, FCBGA |
| Surface Mount | YES |
| Operating Temperature | 0°C~105°C TA |
| Packaging | Tray |
| Published | 2012 |
| Series | QorIQ P5 |
| JESD-609 Code | e1 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| ECCN Code | 5A002.A.1 |
| Terminal Finish | Tin/Silver/Copper (Sn/Ag/Cu) |
| HTS Code | 8542.31.00.01 |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 245 |
| Supply Voltage | 1.2V |
| Terminal Pitch | 1mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| JESD-30 Code | S-PBGA-B1295 |
| Supply Voltage-Max (Vsup) | 1.23V |
| Supply Voltage-Min (Vsup) | 1.17V |
| Speed | 2.2GHz |
| uPs/uCs/Peripheral ICs Type | MICROPROCESSOR, RISC |
| Core Processor | PowerPC e5500 |
| Clock Frequency | 166MHz |
| Address Bus Width | 16 |
| Boundary Scan | YES |
| Low Power Mode | YES |
P5040NSE72QC Overview
Since the microprocessor is packed in 1295-BBGA, FCBGA, shipping overseas is convenient. High reliability is achieved using advanced packaging method Tray. Cores/Bus width is 4 Core 64-Bit. Recognize operating temperatures around 0°C~105°C TA. QorIQ P5 is its series number. A PowerPC e5500 processor is present in this CPU. There are DDR3, DDR3L RAM controllers on this CPU. This microprocessor features I2C, MMC/SD, PCIe, SPI, UART interfaces to better serve its users. I/O is run at 1.0V 1.2V on this CPU. As far as the uPs/uCs/Peripheral ICs type is concerned, this is a MICROPROCESSOR, RISC. Using a 1.2V voltage supply, you should be able to operate the cpu microprocessor. A maximum supply current of 1.23V can be achieved by the microprocessor. With a 64 width external data bus, this CPU has a wide external data bus. There is a clock frequency of 166MHz on the microprocessor.
P5040NSE72QC Features
PowerPC e5500 Core
P5040NSE72QC Applications
There are a lot of NXP USA Inc. P5040NSE72QC Microprocessor applications.
- Blood pressure monitors
- Auto-breaking system
- Firewalls
- Oil and gas
- Accu-check
- Removable disks
- Home appliances
- Petrochemical
- Consumer electronics products
- Telephone sets