OPA569AIDWPR
| Parameters | |
|---|---|
| Unity Gain BW-Nom | 1200 kHz |
| Voltage Gain | 126dB |
| Power Supply Rejection Ratio (PSRR) | 98.42dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 7.5V |
| Voltage - Input Offset | 500μV |
| Low-Bias | YES |
| Micropower | NO |
| Programmable Power | NO |
| Height | 2.65mm |
| Length | 12.82mm |
| Width | 7.52mm |
| Thickness | 2.55mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 6 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Contact Plating | Gold |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 20 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Subcategory | Operational Amplifier |
| Packing Method | TR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | OPA569 |
| Pin Count | 20 |
| Output Type | Rail-to-Rail |
| Number of Elements | 1 |
| Power Supplies | 3/5V |
| Operating Supply Current | 9mA |
| Nominal Supply Current | 6mA |
| Output Current | 2A |
| Slew Rate | 1.2V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 60 dB |
| Current - Input Bias | 1pA |
| Voltage - Supply, Single/Dual (±) | 2.7V~5.5V ±1.35V~2.75V |
| Output Current per Channel | 2.4A |
| Input Offset Voltage (Vos) | 2mV |
| Bandwidth | 1.2MHz |
OPA569AIDWPR Overview
In order to protect the op amps, a 20-SOIC (0.295, 7.50mm Width) Exposed Pad case is used. An op amp of this type is a General Purpose-type. A Tape & Reel (TR) case is used for delivering the op amp. It is estimated that there will be at least 20 terminations this year. It consists of a total of 20 pins in total. Please take in mind that op amp should be run at 5V. To be specific, this instrumentation amplifier is a type of Operational Amplifier. 20 pins are available on the instrumentation amplifier. With regards to the offset voltage of the input, buffer amplifier is rated at 2mV. Surface Mount is the recommended mounting type for this linear amplifier. The buffer amplifier functions well at -40°C~85°C as far as operating temperature is concerned. Using a supply current of 9mA , this buffer op amp will be able to operate. Keeping the voltage gain at 126dB is the best course of action. On the output type, there are Rail-to-Rail different types of op amps. The linear amplifier consists of 1 different elements in total. An buffer amplifier is packed in a TR-shape according to the design.
OPA569AIDWPR Features
20 Pins
supply voltage of 5V
126dB voltage gain
Output Type: Rail-to-Rail
OPA569AIDWPR Applications
There are a lot of Texas Instruments OPA569AIDWPR Instrumentational OP Amps applications.
- High gain DC amplifier
- Blood pressure sensors
- Automotive sensors
- Exponential operation circuits
- Active probe
- Switching amplifier
- Division circuits
- Portable docking station
- Tablets
- Radiation thermometry transducers