OPA2379AIDCNT
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | SOT-23-8 |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Operational Amplifier |
| Packing Method | TR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Base Part Number | OPA2379 |
| Pin Count | 8 |
| Output Type | Rail-to-Rail |
| Number of Channels | 2 |
| Operating Supply Current | 2.9μA |
| Nominal Supply Current | 5.5μA |
| Output Current | 5mA |
| Slew Rate | 0.03V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 90 dB |
| Current - Input Bias | 5pA |
| Voltage - Supply, Single/Dual (±) | 1.8V~5.5V ±0.9V~2.75V |
| Output Current per Channel | 5mA |
| Input Offset Voltage (Vos) | 1.5mV |
| Bandwidth | 90 kHz |
| Unity Gain BW-Nom | 90 kHz |
| Voltage Gain | 120dB |
| Average Bias Current-Max (IIB) | 0.00005μA |
| Power Supply Rejection Ratio (PSRR) | 113.98dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 7V |
| Voltage - Input Offset | 400μV |
| Low-Bias | YES |
| Micropower | YES |
| Max Frequency | 100kHz |
| Bias Current-Max (IIB) @25C | 0.00005μA |
| Programmable Power | NO |
| Nominal Gain Bandwidth Product | 90 kHz |
| Max I/O Voltage | 1.5mV |
| Input Offset Current-Max (IIO) | 0.00005μA |
| Height | 1.45mm |
| Length | 2.9mm |
| Width | 1.63mm |
| Thickness | 1.1mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
OPA2379AIDCNT Overview
There is a SOT-23-8 case package that contains the instrumentation amplifiers. This is a General Purpose type op amp. As far as the packaging is concerned, buffer op amp is delivered in a Tape & Reel (TR) case. There have been a total of 8 terminations over the past year. Linear amplifier has a total of 8 pins. As a reminder, this buffer op amp should be powered by 5V battery and that the battery should be inserted in the amplifier. In order to be more specific, this instrumentation amplifier is one of the types of Operational Amplifier devices. 8 pins are included on the operational amplifiers. Regarding input offset voltage, op amp rates 1.5mV. Surface Mount is the recommended mounting type of operational amplifiers. It is important to note that this linear amplifier works well at a temperature of -40°C~125°C when it comes to operating temperatureThis op amp can operate from a supply current at 2.9μA. Voltage gain should remain at 120dB. Buffer op amp is equipped with 2 channels on the device. One of the many benefits of this op amp ic is that it emits Rail-to-Rail signals. The instrumentation amplifier is packed in the form of TR.
OPA2379AIDCNT Features
8 Pins
supply voltage of 5V
120dB voltage gain
Output Type: Rail-to-Rail
OPA2379AIDCNT Applications
There are a lot of Texas Instruments OPA2379AIDCNT Instrumentational OP Amps applications.
- Non-polarized electrodes
- Portable electronic products powered by batteries
- Medical instruments
- High input resistance broadband
- Car stereo
- RF cable systems
- Multiplication circuits
- Portable docking station
- Subtraction operation circuits
- Mobile phone