OPA1632DG4
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Weight | 75.891673mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Operational Amplifier |
| Max Power Dissipation | 2W |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Base Part Number | OPA1632 |
| Pin Count | 8 |
| Output Type | Differential |
| Number of Elements | 1 |
| Operating Supply Current | 14mA |
| Nominal Supply Current | 14mA |
| Output Current | 85mA |
| Slew Rate | 50V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | Audio |
| Common Mode Rejection Ratio | 74 dB |
| Current - Input Bias | 2μA |
| Voltage - Supply, Single/Dual (±) | 5V~32V ±2.5V~16V |
| Output Current per Channel | 85mA |
| Supply Type | Dual, Single |
| Input Offset Voltage (Vos) | 3mV |
| Bandwidth | 180MHz |
| Gain Bandwidth Product | 180MHz |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Unity Gain BW-Nom | 180000 kHz |
| Voltage Gain | 78dB |
| Average Bias Current-Max (IIB) | 6μA |
| Power Supply Rejection Ratio (PSRR) | 70dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Voltage - Input Offset | 500μV |
| Gain | 78 dB |
| Low-Bias | NO |
| Micropower | NO |
| Bias Current-Max (IIB) @25C | 6μA |
| Programmable Power | NO |
| Dual Supply Voltage | 15V |
| Input Offset Current-Max (IIO) | 0.5μA |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
OPA1632DG4 Overview
It is packaged in an 8-SOIC (0.154, 3.90mm Width)-case that protects the operational amplifiers from damage. An op amp ic of the Audio type. As far as the packaging is concerned, buffer op amp is delivered in a Tube case. There have been a total of 8 terminations over the past year. Buffer amplifier has a total of 8 pins on it. I would like you to keep in mind that this buffer amplifier needs to be run at a voltage of 15V. In order to be more specific, this instrumentation amplifier is one of the types of Operational Amplifier devices. There are 8 pins on this chip. Regarding input offset voltage, op amp rates 3mV. It is recommended that this electronic component be mounted using the Surface Mount mounting type. Regarding the operating temperature of this device, instrumentation amplifier performs well at a temperature of -40°C~85°C . Using a supply current of 14mA , this buffer op amp will be able to operate. 78dB should remain the voltage gain. One of the many advantages that this linear amplifier has, among many other things, is the fact that it outputs Differential signals. 1 elements make up the design of this buffer amplifier.
OPA1632DG4 Features
8 Pins
supply voltage of 15V
78dB voltage gain
Output Type: Differential
OPA1632DG4 Applications
There are a lot of Texas Instruments OPA1632DG4 Instrumentational OP Amps applications.
- Multiplication circuits
- Automatic control
- RF cable systems
- Precision measurement
- High-frequency data acquisition systems
- Scintillation detectors
- Ultrasound transducers
- Fast A/D and D/A converters
- earphone
- Power generator