NX3L1T3157GM,132
| Parameters | |
|---|---|
| Switching | BREAK-BEFORE-MAKE |
| Switch-off Time-Max | 90ns |
| Voltage - Supply, Single (V+) | 1.4V~4.3V |
| Height Seated (Max) | 0.5mm |
| RoHS Status | ROHS3 Compliant |
| Factory Lead Time | 7 Weeks |
| Mounting Type | Surface Mount |
| Package / Case | 6-XFDFN |
| Surface Mount | YES |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2010 |
| JESD-609 Code | e3 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| Terminal Finish | Tin (Sn) |
| Subcategory | Multiplexer or Switches |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 1.65V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | NX3L1T3157G |
| Output | SEPARATE OUTPUT |
| Pin Count | 6 |
| JESD-30 Code | R-PDSO-N6 |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 4.3V |
| Number of Channels | 1 |
| Number of Circuits | 1 |
| -3db Bandwidth | 60MHz |
| On-State Resistance (Max) | 500mOhm |
| Multiplexer/Demultiplexer Circuit | 2:1 |
| Off-state Isolation-Nom | 90 dB |
| Current - Leakage (IS(off)) (Max) | 10nA |
| Channel Capacitance (CS(off), CD(off)) | 35pF |
| On-state Resistance Match-Nom | 0.04Ohm |
| Switch Circuit | SPDT |
| Switch Time (Ton, Toff) (Max) | 40ns, 20ns |
| Charge Injection | 15pC |
| Channel-to-Channel Matching (ΔRon) | 20m Ω |
NX3L1T3157GM,132 Overview
Presented in 6-XFDFN, this electrical component is convenient for overseas shipping. Advanced packaging method Tape & Reel (TR) is used to provide high reliability. It is mounted in the position Surface Mount. 2:1 is the ratio between multiplexers and demultiplexers. Increasing operating temperature to around -40°C~125°C TA. In total, 6 terminations have occurred. High-quality output is provided by the electronic component's 1 channels. When the electronic component is given a voltage of 1.65V, it should be turned on and run. This electronic part can be found in the 6 series. Circuits based on SPDT switching are used to construct these analog switch ics. A total of 1 circuits make up this switch device. Search with NX3L1T3157G if you are looking for analog multiplexer variants. Theswitch device is a typical Multiplexer or Switches. The voltage required by this switch device is 1.4V~4.3V, draining from a single voltage supply. The outputs of this digital multiplexer are SEPARATE OUTPUT in number.
NX3L1T3157GM,132 Features
1 Channels
Switch Circuit: SPDT
-3db Bandwidth: 60MHz
NX3L1T3157GM,132 Applications
There are a lot of NXP USA Inc. NX3L1T3157GM,132 Analog Switches & Multiplexers ICs applications.
- PDH Multiplexers
- Medical
- Private Branch Exchange (PBX)
- High-Voltage
- T1/E1 Terminals
- Low-Voltage
- Automotive applications
- Voice over IP/DSL – Integrated Access Devices, Smart
- Audio and video routing
- Precision test equipment