NUD3105LT1G
| Parameters | |
|---|---|
| Factory Lead Time | 4 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 4 hours ago) |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | TO-236-3, SC-59, SOT-23-3 |
| Number of Pins | 3 |
| Transistor Element Material | SILICON |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2006 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 3 |
| ECCN Code | EAR99 |
| Resistance | 1.2Ohm |
| Additional Feature | LOGIC LEVEL COMPATIBLE |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Current Rating | 500mA |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | NUD3105 |
| Pin Count | 3 |
| Number of Outputs | 1 |
| Output Voltage | 6V |
| Output Type | N-Channel |
| Max Output Current | 300mA |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Interface | On/Off |
| Element Configuration | Single |
| Output Configuration | Low Side |
| Operating Mode | ENHANCEMENT MODE |
| Power Dissipation | 225mW |
| Output Current | 400mA |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Switch Type | Relay, Solenoid Driver |
| Transistor Application | SWITCHING |
| Halogen Free | Halogen Free |
| Rise Time | 30ns |
| Drain to Source Voltage (Vdss) | 6V |
| Fall Time (Typ) | 30 ns |
| Continuous Drain Current (ID) | 500mA |
| Ratio - Input:Output | 1:1 |
| Gate to Source Voltage (Vgs) | 6V |
| Voltage - Load | 6V Max |
| Drain Current-Max (Abs) (ID) | 0.5A |
| Drain to Source Breakdown Voltage | 6V |
| FET Technology | METAL-OXIDE SEMICONDUCTOR |
| Rds On (Typ) | 900m Ω (Max) |
| Drain to Source Resistance | 900mOhm |
| Height | 1.016mm |
| Length | 3.0226mm |
| Width | 1.397mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
NUD3105LT1G Description
The NUD3105LT1G PMIC from ON Semiconductor is used to switch inductive loads such as relays, solenoids, incandescent bulbs, and small DC motors without the usage of a freewheeling diode.
NUD3105LT1G Features
Provides a Robust Driver Interface between DC Relay Coil and Sensitive Logic Circuits
Optimized to Switch Relays from 3.0 V to 5.0 V Rail
Capable of Driving Relay Coils Rated up to 2.5 W at 5.0 V
Internal Zener Eliminates the Need for Free-Wheeling Diode
Internal Zener Clamp Routes Induced Current to Ground for Quieter Systems Operation
NUD3105LT1G Applications
Telecom
Computers and Office
Consumer
Automotive