NLX2G66DMUTCG
| Parameters | |
|---|---|
| Factory Lead Time | 2 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-UFDFN |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2013 |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| Resistance | 5.5Ohm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Multiplexer or Switches |
| Technology | CMOS |
| Terminal Position | DUAL |
| Number of Functions | 2 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.5mm |
| Output | SEPARATE OUTPUT |
| Pin Count | 8 |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1.65V |
| Analog IC - Other Type | DIFFERENTIAL MULTIPLEXER |
| Max Supply Current | 1μA |
| Turn On Delay Time | 4.9 ns |
| Number of Inputs | 2 |
| Halogen Free | Halogen Free |
| Supply Type | Single |
| Turn-Off Delay Time | 6 ns |
| -3db Bandwidth | 270MHz |
| On-State Resistance (Max) | 5.5Ohm |
| Multiplexer/Demultiplexer Circuit | 1:1 |
| Off-state Isolation-Nom | 60 dB |
| Current - Leakage (IS(off)) (Max) | 100nA |
| Channel Capacitance (CS(off), CD(off)) | 6pF |
| On-state Resistance Match-Nom | 8Ohm |
| Switch Circuit | SPST - NO |
| Switch Time (Ton, Toff) (Max) | 4.9ns, 6ns |
| Channel-to-Channel Matching (ΔRon) | 4.5 Ω |
| Crosstalk | -100dB @ 1MHz |
| Switch-on Time-Max | 10ns |
| Voltage - Supply, Single (V+) | 1.65V~5.5V |
| Normal Position | NO |
| Height Seated (Max) | 0.55mm |
| Length | 1.95mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
NLX2G66DMUTCG Overview
As the electronic part is packed in 8-UFDFN, international shipping is convenient. This packaging method provides high reliability because it uses advanced packaging techniques. The multiplexer is located in Surface Mount. Multiplexers and demultiplexers have a ratio of 1:1. Around -55°C~125°C TA is the extended operating temperature. In total, there have been 8 terminations. Due to its 1 channels, the electrical component produces high-quality output. When the electronic component is given a voltage of 1.8V, it should be turned on and run. An electrical component of this type can be found in the 8 series. On the other hand, analog switches can be constructed using SPST - NO switching circuits. Analog switches have 5.5Ohm internal resistance. To find out what the 8 pins do, please refer to the datasheets. There is a standard Multiplexer or Switches analogue multiplexer here. It is generally not recommended to supply a voltage higher than 5.5V to the switch device in normal circumstances. Digital switch that provides Single power at a cost-effective price. It is recommended that the electrical component receives a voltage of 1.65V. An analogue multiplexer drains from a single voltage supply at 1.65V~5.5V. The analogue multiplexer may be damaged if voltage is greater than 1μA. It is integrated with DIFFERENTIAL MULTIPLEXER analog ICs. A total of SEPARATE OUTPUT outputs are available on this analog switch ic. Among the inputs that can be operated are the 2 inputs.
NLX2G66DMUTCG Features
1 Channels
Switch Circuit: SPST - NO
-3db Bandwidth: 270MHz
NLX2G66DMUTCG Applications
There are a lot of ON Semiconductor NLX2G66DMUTCG Analog Switches & Multiplexers ICs applications.
- Signal routing between systems
- Communication systems
- PDH Multiplexers
- PDAs
- Access Concentrators
- Central office
- Relay Replacement
- ADCs such as AD7840/8, AD7870/1/2/4/5/6/8
- MP3 players
- Audio and video routing