NLV74HCT74ADR2G
| Parameters | |
|---|---|
| Factory Lead Time | 2 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 14 |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2006 |
| Series | 74HCT |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| Type | D-Type |
| Terminal Finish | Tin (Sn) |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Supply Voltage | 5V |
| Function | Set(Preset) and Reset |
| Output Type | Differential |
| Number of Elements | 2 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Clock Frequency | 30MHz |
| Family | HCT |
| Current - Quiescent (Iq) | 2μA |
| Current - Output High, Low | 4mA 4mA |
| Output Polarity | COMPLEMENTARY |
| Number of Bits per Element | 1 |
| Max Propagation Delay @ V, Max CL | 24ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 10pF |
| Propagation Delay (tpd) | 36 ns |
| Length | 8.65mm |
| Width | 3.9mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
NLV74HCT74ADR2G Overview
The item is packaged in 14-SOIC (0.154, 3.90mm Width)cases. You can find it in the Tape & Reel (TR)package. The output it is configured with uses Differential. In the configuration of the trigger, Positive Edgeis used. The electronic part is mounted in the way of Surface Mount. A 4.5V~5.5Vsupply voltage is required for it to operate. In this case, the operating temperature is -55°C~125°C TA. Logic flip flops of this type are classified as D-Type. The 74HCTseries comprises this type of FPGA. A frequency of 30MHzshould be the maximum output frequency. The element count is 2 . During its operation, it consumes 2μA quiescent energy. Currently, there are 14 terminations. It is powered from a supply voltage of 5V. The input capacitance of this T flip flop is 10pF farads, which is defined as the capacitance between the input terminals of an op amp with either input grounded. Electronic devices of this type belong to the HCTfamily. A total of 14pins are provided on this board. It reaches 5.5Vwhen the supply voltage is maximal (Vsup). The supply voltage (Vsup) should be kept above 4.5V for normal operation.
NLV74HCT74ADR2G Features
Tape & Reel (TR) package
74HCT series
14 pins
NLV74HCT74ADR2G Applications
There are a lot of ON Semiconductor NLV74HCT74ADR2G Flip Flops applications.
- ESD performance
- Set-reset capability
- Frequency Dividers
- ESCC
- Power down protection
- 2 – Bit synchronous counter
- Counters
- Consumer
- ATE
- Load Control