NLV74HC574ADTR2G
| Parameters | |
|---|---|
| Factory Lead Time | 8 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 20 |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2011 |
| Series | Automotive, AEC-Q100, 74HC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Type | D-Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Function | Standard |
| Qualification Status | Not Qualified |
| Output Type | Tri-State, Non-Inverted |
| Number of Elements | 1 |
| Supply Voltage-Max (Vsup) | 6V |
| Power Supplies | 2/6V |
| Supply Voltage-Min (Vsup) | 2V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Clock Frequency | 35MHz |
| Propagation Delay | 27 ns |
| Quiescent Current | 4μA |
| Family | HC/UH |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 7.8mA 7.8mA |
| Output Polarity | TRUE |
| Max I(ol) | 0.006 A |
| Number of Bits per Element | 8 |
| Max Propagation Delay @ V, Max CL | 27ns @ 6V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 10pF |
| Clock Edge Trigger Type | Positive Edge |
| Length | 6.5mm |
| Width | 4.4mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
NLV74HC574ADTR2G Overview
It is embeded in 20-TSSOP (0.173, 4.40mm Width) case. The Tape & Reel (TR)package contains it. There is a Tri-State, Non-Invertedoutput configured with it. It is configured with a trigger that uses a value of Positive Edge. There is an electric part mounted in the way of Surface Mount. A voltage of 2V~6Vis required for its operation. It is operating at -55°C~125°C TA. The type of this D latch is D-Type. It is a type of FPGA belonging to the Automotive, AEC-Q100, 74HC series. There should be no greater frequency than 35MHzon its output. There are 1 elements in it. A total of 20 terminations have been made. The D flip flop is powered by a voltage of 5V . Input capacitance of this device is 10pF farads. The electronic device belongs to the HC/UHfamily. It is mounted by the way of Surface Mount. A total of 20pins are provided on this board. This device has the clock edge trigger type of Positive Edge. The part you are looking for is included in FF/Latches. The maximal supply voltage (Vsup) reaches 6V. Normally, the supply voltage (Vsup) should be above 2V. Considering its reliability, this T flip flop is well suited for TAPE AND REEL. The power supply is 2/6V. The flip flop has 2ports embedded within it. There is a consumption of 4μAof quiescent current from it.
NLV74HC574ADTR2G Features
Tape & Reel (TR) package
Automotive, AEC-Q100, 74HC series
20 pins
2/6V power supplies
NLV74HC574ADTR2G Applications
There are a lot of ON Semiconductor NLV74HC574ADTR2G Flip Flops applications.
- Registers
- Divide a clock signal by 2 or 4
- Patented noise
- Data Synchronizers
- Individual Asynchronous Resets
- Functionally equivalent to the MC10/100EL29
- Frequency Divider circuits
- Supports Live Insertion
- ATE
- Event Detectors