NLV74HC273ADTR2G
| Parameters | |
|---|---|
| Factory Lead Time | 2 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 20 |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2005 |
| Series | Automotive, AEC-Q100 |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Type | D-Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Function | Reset |
| Qualification Status | Not Qualified |
| Output Type | Non-Inverted |
| Number of Elements | 1 |
| Supply Voltage-Max (Vsup) | 6V |
| Power Supplies | 2/6V |
| Supply Voltage-Min (Vsup) | 2V |
| Load Capacitance | 50pF |
| Clock Frequency | 35MHz |
| Propagation Delay | 25 ns |
| Quiescent Current | 4μA |
| Family | HC/UH |
| Current - Output High, Low | 7.8mA 7.8mA |
| Output Polarity | TRUE |
| Max I(ol) | 0.006 A |
| Number of Bits per Element | 8 |
| Max Propagation Delay @ V, Max CL | 25ns @ 6V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 10pF |
| Clock Edge Trigger Type | Positive Edge |
| Length | 6.5mm |
| Width | 4.4mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
NLV74HC273ADTR2G Overview
It is embeded in 20-TSSOP (0.173, 4.40mm Width) case. D flip flop is embedded in the Tape & Reel (TR) package. The output it is configured with uses Non-Inverted. This trigger uses the value Positive Edge. Surface Mountmounts this electrical part. The supply voltage is set to 2V~6V. The operating temperature is -55°C~125°C TA. It belongs to the type D-Typeof flip flops. The Automotive, AEC-Q100series comprises this type of FPGA. There should be no greater frequency than 35MHzon its output. D latch consists of 1 elements. There are 20 terminations,It is powered from a supply voltage of 5V. A 10pFfarad input capacitance is provided by this T flip flop. In terms of electronic devices, this device belongs to the HC/UHfamily of devices. The electronic part is mounted in the way of Surface Mount. Basically, it is designed with a set of 20 pins. This device has Positive Edgeas its clock edge trigger type. The part is included in FF/Latches. In this case, the maximum supply voltage (Vsup) reaches 6V. Normally, the supply voltage (Vsup) should be above 2V. On the basis of its reliable performance, this D flip flop is well suited for use with TAPE AND REEL. A power supply of 2/6Vis required to operate it. It consumes 4μA of quiescent current without being affected by external factors.
NLV74HC273ADTR2G Features
Tape & Reel (TR) package
Automotive, AEC-Q100 series
20 pins
2/6V power supplies
NLV74HC273ADTR2G Applications
There are a lot of ON Semiconductor NLV74HC273ADTR2G Flip Flops applications.
- Event Detectors
- Circuit Design
- Computers
- Counters
- Pattern generators
- Matched Rise and Fall
- Count Modes
- Cold spare funcion
- ESD protection
- Patented noise