NLSX4373DMR2G
| Parameters | |
|---|---|
| Number of Ports | 2 |
| Number of Bits | 1 |
| Propagation Delay | 20 ns |
| Turn On Delay Time | 1 μs |
| Logic Function | Translator |
| Data Rate | 20Mbps |
| Output Characteristics | OPEN-DRAIN/3-STATE |
| Halogen Free | Halogen Free |
| Output Polarity | TRUE |
| Logic IC Type | BUS TRANSCEIVER |
| High Level Output Current | -20μA |
| Channel Type | Bidirectional |
| Low Level Output Current | 20μA |
| Control Type | ENABLE LOW |
| Translator Type | Voltage Level |
| Voltage - VCCA | 1.5V~5.5V |
| Voltage - VCCB | 1.5V~5.5V |
| Length | 3mm |
| Width | 3mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 2 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2006 |
| Feature | Auto-Direction Sensing |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| Terminal Finish | Nickel/Gold/Palladium (Ni/Au/Pd) |
| Packing Method | TR |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 2 |
| Supply Voltage | 1.5V |
| Terminal Pitch | 0.65mm |
| Base Part Number | NLSX4373 |
| Pin Count | 8 |
| Output Type | Open Drain, Tri-State |
| Number of Channels | 2 |
| Number of Circuits | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1.5V |
NLSX4373DMR2G Overview
Embedded in the 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) package, it is available for you to use.Packaged in the way of Tape & Reel (TR).Level translators is configured wlevel translatorsh an output of Open Drain, Tri-State.There is Voltage Level translator type for this electrical device.The electronic part is mounted in a way that corresponds to Surface Mount.In this electrical device, the Channel type is Bidirectional.During operation, the temperature is set to -40°C~85°C TA.Level translators achieves superior flexibilLevel translatorsy by using 1 circuLevel translatorss.Ending a transmission line involves 8 terminations.Based on this base part number NLSX4373, its related parts can be identified.There is a voltage supply of 1.5V which powers the device.The device has a pin count of 8.Designed with 8 pins, it is compatible with a wide range of devices.The design of this electronic part is based on 1 bits.Level translators supports the maximal supply voltage of 5.5V.A minimal voltage of 1.5V is needed to operate it.VCCA is configured with a supply rail that starts at 1.5V~5.5V.A VCCB supply rail is configured as 1.5V~5.5V.Mounting this electronic component is done using the Surface Mount method.Channel count is 2.In this case, the logic IC is BUS TRANSCEIVER.In transmission lines, there are 2 terminations, which correspond to the characteristic impedance of the line.When operating, Auto-Direction Sensing can be ensured.This device is well suited for TR based on its reliable performance.
NLSX4373DMR2G Features
8-TSSOP, 8-MSOP (0.118, 3.00mm Width) package
1 circuits
8 pin count
8 pins
NLSX4373DMR2G Applications
There are a lot of ON Semiconductor NLSX4373DMR2G voltage translators & level shifters applications.
- Servers
- Push-pull level shifting (UART, SPI, JTAG, and so forth)
- Driving Indicator LEDs or Buzzers
- Product Traceability
- Tablet
- Controlled Baseline
- Telecommunications
- Infotainment Head Unit
- Available in Military (-55°C to 125°C)
- Telecom