NLSX4014MUTAG
| Parameters | |
|---|---|
| Supply Voltage | 2.8V |
| Base Part Number | NLSX4014 |
| Pin Count | 12 |
| Output Type | Tri-State, Non-Inverted |
| Number of Channels | 4 |
| Number of Circuits | 1 |
| Max Supply Voltage | 4.5V |
| Min Supply Voltage | 900mV |
| Number of Ports | 2 |
| Output Current | 20μA |
| Number of Bits | 4 |
| Propagation Delay | 250 ns |
| Quiescent Current | 2μA |
| Turn On Delay Time | 9.3 ns |
| Logic Function | Level Shifter, Translator |
| Data Rate | 140Mbps |
| Output Characteristics | 3-STATE |
| Halogen Free | Halogen Free |
| Output Polarity | TRUE |
| Logic IC Type | BUS DRIVER |
| High Level Output Current | -20μA |
| Channel Type | Bidirectional |
| Low Level Output Current | 20μA |
| Translator Type | Voltage Level |
| Voltage - VCCA | 0.9V~4.1V |
| Voltage - VCCB | 1.3V~4.5V |
| Height Seated (Max) | 0.55mm |
| Length | 2mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 2 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 21 hours ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 12-UFQFN |
| Number of Pins | 12 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2007 |
| JESD-609 Code | e4 |
| Feature | Auto-Direction Sensing |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 12 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Technology | CMOS |
| Terminal Position | QUAD |
| Number of Functions | 1 |
NLSX4014MUTAG Overview
Embedded in the 12-UFQFN package, it is available for you to use.Tape & Reel (TR) is the packaging method.Tri-State, Non-Inverted is used for the output it is configured with.This electrical device has a translator type of Voltage Level.Surface Mount is used to mount this electronic part.Bidirectional is the Channel type of this electrical device.Operation is performed at -40°C~85°C TA.Its superior flexibility is achieved by using 1 circuits.When it comes to terminating a transmission line, there are 12 terminations.According to the base part number NLSX4014, its related parts can be founded.Level translators is powered by a 2.8V supply.There are 12 pins on it.Level translators has 12 pins.There are 4 bits in this electronic part, which means it is designed in such a way.Voltages above 4.5V are supported.A voltage of 900mV is the minimum supply voltage required for it to operate.0.9V~4.1V is the supply rail configuration on the VCCA.1.3V~4.5V is the supply rail configuration on the VCCB.Mounting this electronic component is done using the Surface Mount method.There are a total of 4 channels.Level translators uses the logic IC BUS DRIVER.2 terminations are the practice of terminating a transmission line with a device matching its characteristic impedance.Without external influence, it consumes 2μA of quiescent current.When operating, Auto-Direction Sensing can be ensured.Featuring a 20μA output current, its design flexibility is maximized.
NLSX4014MUTAG Features
12-UFQFN package
1 circuits
12 pin count
12 pins
NLSX4014MUTAG Applications
There are a lot of ON Semiconductor NLSX4014MUTAG voltage translators & level shifters applications.
- One Fabrication Site
- MDIO
- Notebook
- Telecom
- Signaling Level Conversion for Clock or Data
- Advanced Driver Assistance System (ADAS)
- Personal computers
- Extended Product-Change Notification
- Routers (routing equipment)
- Debouncing a Mechanical Switch