NLSX3018MUTAG
| Parameters | |
|---|---|
| Output Type | Tri-State, Non-Inverted |
| Number of Channels | 8 |
| Number of Circuits | 1 |
| Max Supply Voltage | 4.5V |
| Min Supply Voltage | 1.3V |
| Number of Ports | 2 |
| Number of Bits | 4 |
| Propagation Delay | 6.5 ns |
| Turn On Delay Time | 4.5 ns |
| Logic Function | Translator |
| Data Rate | 110Mbps |
| Output Characteristics | 3-STATE |
| Halogen Free | Halogen Free |
| Output Polarity | TRUE |
| Logic IC Type | BUS DRIVER |
| High Level Output Current | -20μA |
| Channel Type | Bidirectional |
| Low Level Output Current | 20μA |
| Translator Type | Voltage Level |
| Voltage - VCCA | 0.9V~4.5V |
| Voltage - VCCB | 1.3V~4.5V |
| Height Seated (Max) | 0.55mm |
| Length | 4mm |
| Width | 2mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 4 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 6 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-UFDFN |
| Number of Pins | 20 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2006 |
| JESD-609 Code | e4 |
| Feature | Auto-Direction Sensing |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.4mm |
| Base Part Number | NLSX3018 |
| Pin Count | 20 |
NLSX3018MUTAG Overview
A package called 20-UFDFN contains it.This package has the format of Tape & Reel (TR).In this configuration, the output is set to Tri-State, Non-Inverted.There is Voltage Level translator type for this electrical device.Electronic parts are mounted using the Surface Mount method.A Bidirectional channel type is associated with this electrical device.A temperature of -40°C~85°C TA is used for operation.1 circuits are used to achieve its superior flexibility.Usually, when a transmission line is terminated, there are 20 termination points used.Level translators is possible to determine Level translatorss related parts using the base part number NLSX3018.This device is powered by a supply voltage of 3.3V which is applied to it.There are 20 pins on it.The board has 20 pins.The design of this electronic part contains 4 bits.The maximum supply voltage is 4.5V.This device requires a minimum voltage of 1.3V.VCCA is configured with a supply rail that starts at 0.9V~4.5V.1.3V~4.5V is the configuration of the VCCB supply rail.This electronic part is mounted in the way of Surface Mount.There are no channels.As for the logic IC it uses, it is a BUS DRIVER.In transmission lines, there are 2 terminations, in which an impedance-matching device is used to end the line.Auto-Direction Sensing can be ensured when operating.
NLSX3018MUTAG Features
20-UFDFN package
1 circuits
20 pin count
20 pins
NLSX3018MUTAG Applications
There are a lot of ON Semiconductor NLSX3018MUTAG voltage translators & level shifters applications.
- Motor Drives
- Eliminate slow or noisy input signals
- Handset
- LCD Panels Using GIP / GOA / ASG Technology
- Personal Electronics
- One Fabrication Site
- Routers (Telecom Switching Equipment)
- Test Site
- Smartphone
- Extended Product Life Cycle