NLAST4501DFT2
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 5-TSSOP, SC-70-5, SOT-353 |
| Surface Mount | YES |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e0 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 5 |
| Terminal Finish | TIN LEAD |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 3V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 5 |
| JESD-30 Code | R-PDSO-G5 |
| Qualification Status | COMMERCIAL |
| Supply Voltage-Max (Vsup) | 5.5V |
| Number of Channels | 1 |
| Number of Circuits | 1 |
| -3db Bandwidth | 220MHz |
| On-State Resistance (Max) | 25Ohm |
| Multiplexer/Demultiplexer Circuit | 1:1 |
| Off-state Isolation-Nom | 93 dB |
| Current - Leakage (IS(off)) (Max) | 1nA |
| Channel Capacitance (CS(off), CD(off)) | 10pF 10pF |
| Switch Circuit | SPST - NO |
| Switch Time (Ton, Toff) (Max) | 9ns, 10ns |
| Charge Injection | 3pC |
| Voltage - Supply, Single (V+) | 2V~5.5V |
| Length | 2mm |
| RoHS Status | Non-RoHS Compliant |
NLAST4501DFT2 Overview
Due to its 5-TSSOP, SC-70-5, SOT-353 packaging, the electronic part is convenient for international shipping. A high level of reliability can be achieved through the use of an advanced packaging method Tape & Reel (TR). Mounted in Surface Mount is this multiplexer. There is 1:1 ratio between the number of multiplexers and demultiplexers. Operating temperature extended to -55°C~125°C TA. In total, there are 5 terminations. By its 1 channels, the electronic component provides high-quality output. In the case of a voltage supply of 3V volts, the electrical part can be powered up and run. This electronic part can be found in the 5 series. A SPST - NO switching circuit is used for these analog switches. This multiplexer is composed of 1 circuits. This analogue multiplexer requires a voltage of 2V~5.5V when it drains from a single voltage supply.
NLAST4501DFT2 Features
1 Channels
Switch Circuit: SPST - NO
-3db Bandwidth: 220MHz
NLAST4501DFT2 Applications
There are a lot of Rochester Electronics, LLC NLAST4501DFT2 Analog Switches & Multiplexers ICs applications.
- DVD-R
- Communications systems
- PCMCIA cards
- Cross Connects
- Microprocessor Controlled Analog Systems
- DSUs
- Communication systems
- Fiber to the Home
- SONET/SDH ADM
- PDH Multiplexers