NLAS4684MNR2
| Parameters | |
|---|---|
| Crosstalk | -83dB @ 100kHz |
| Switch-on Time-Max | 60ns |
| Switch-off Time-Max | 50ns |
| Voltage - Supply, Single (V+) | 1.8V~5.5V |
| Height Seated (Max) | 1mm |
| Length | 3mm |
| RoHS Status | Non-RoHS Compliant |
| Mounting Type | Surface Mount |
| Package / Case | 10-VFDFN Exposed Pad |
| Surface Mount | YES |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e0 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 10 |
| Terminal Finish | TIN LEAD |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 2 |
| Supply Voltage | 3V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 10 |
| JESD-30 Code | S-XDSO-N10 |
| Qualification Status | COMMERCIAL |
| Supply Voltage-Max (Vsup) | 5.5V |
| Number of Channels | 1 |
| Number of Circuits | 2 |
| -3db Bandwidth | 9.5MHz |
| On-State Resistance (Max) | 800mOhm |
| Multiplexer/Demultiplexer Circuit | 2:1 |
| Off-state Isolation-Nom | 65 dB |
| Current - Leakage (IS(off)) (Max) | 1μA |
| Channel Capacitance (CS(off), CD(off)) | 102pF 104pF |
| On-state Resistance Match-Nom | 0.06Ohm |
| Switch Circuit | SPDT |
| Switch Time (Ton, Toff) (Max) | 30ns, 30ns |
| Charge Injection | 15pC |
| Channel-to-Channel Matching (ΔRon) | 60m Ω |
NLAS4684MNR2 Overview
Packed in 10-VFDFN Exposed Pad, the electronic component is convenient for shipping overseas. A high level of reliability can be achieved through the use of an advanced packaging method Tape & Reel (TR). It is mounted in the position Surface Mount. 2:1 is the ratio of multiplexer to demultiplexer circuits. An extended operating temperature of -55°C~125°C TA degrees Celsius. 10 terminations have been made so far. High-quality output is provided by the electronic component's 1 channels. Powered by a 3V voltage supply, the electrical part should be switched on and run. An electrical component like this is included in the 10 series. Multiplexers built on a SPDT switching circuit are built. The circuits in this analogue multiplexer number 2. The voltage required by this switch device is 1.8V~5.5V, draining from a single voltage supply.
NLAS4684MNR2 Features
1 Channels
Switch Circuit: SPDT
-3db Bandwidth: 9.5MHz
NLAS4684MNR2 Applications
There are a lot of Rochester Electronics, LLC NLAS4684MNR2 Analog Switches & Multiplexers ICs applications.
- ADCs such as AD7840/8, AD7870/1/2/4/5/6/8
- Microwave transmission systems
- Video signal routing
- Battery Powered Instruments
- Medical systems
- Sample-and-hold systems
- Cable Telephony – NIU, Set-Top Box, Home Side Box
- E1 Network Equipment
- Channelized and Unchannelized DS3 applications
- Multi-Line E1 Interface Cards