NLAS4684FCT1G
| Parameters | |
|---|---|
| Factory Lead Time | 13 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Mounting Type | Surface Mount |
| Package / Case | 10-UFBGA, FCBGA |
| Surface Mount | YES |
| Number of Pins | 10 |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2008 |
| JESD-609 Code | e1 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 10 |
| Resistance | 800mOhm |
| Terminal Finish | Tin/Silver/Copper (Sn/Ag/Cu) |
| Subcategory | Multiplexer or Switches |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 3V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | NLAS4684 |
| Pin Count | 10 |
| Number of Outputs | 4 |
| Operating Supply Voltage | 5V |
| Number of Channels | 2 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1.8V |
| Operating Supply Current | 200nA |
| Nominal Supply Current | 180nA |
| Turn On Delay Time | 50 ns |
| Halogen Free | Halogen Free |
| Supply Type | Single |
| Turn-Off Delay Time | 60 ns |
| -3db Bandwidth | 9.5MHz |
| On-State Resistance (Max) | 800mOhm |
| Multiplexer/Demultiplexer Circuit | 2:1 |
| Off-state Isolation-Nom | 65 dB |
| Current - Leakage (IS(off)) (Max) | 1μA |
| Channel Capacitance (CS(off), CD(off)) | 102pF 104pF |
| On-state Resistance Match-Nom | 0.06Ohm |
| Switch Circuit | SPDT |
| Switch Time (Ton, Toff) (Max) | 30ns, 30ns |
| Charge Injection | 15pC |
| Channel-to-Channel Matching (ΔRon) | 60m Ω |
| Crosstalk | -83dB @ 100kHz |
| Switching | BREAK-BEFORE-MAKE |
| Voltage - Supply, Single (V+) | 1.8V~5.5V |
| Height Seated (Max) | 0.65mm |
| Length | 1.965mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
NLAS4684FCT1G Overview
Shipping overseas is convenient with the electronic component packed in 10-UFBGA, FCBGA. The advanced packaging method Tape & Reel (TR) provides high reliability. The multiplexer is located in Surface Mount. Multiplexers and demultiplexers have the same number of circuits 2:1. Increasing operating temperature to around -55°C~125°C TA. Total terminations are 10. A electrical component with 2 channels is capable of high-quality output. In the case of a voltage supply of 3V volts, the electrical part can be powered up and run. There are 10 pins injected into the electronic part body. Multiplexers built on a SPDT switching circuit are built. Try searching for the analog switch ic with NLAS4684 if you are looking for variants. An switch multiplexer with 800mOhm internal resistance has a value of 800mOhm. The datasheets for the 10 pins explain the functions. Multiplexer or Switches is a typical switch device. Users shouldn't supply more than 5.5V voltage to the switch device. Analog switch ics with Single supply type are cost-effective. In order for the electronic part to function properly, the lowest voltage should be 1.8V. The switch device would be able to operate with 200nA current. This analog switch requires a voltage of 1.8V~5.5V to drain from a single voltage supply. The electrical part can be operated at 5V voltage levels. In this digital multiplexer, there are 4 outputs.
NLAS4684FCT1G Features
2 Channels
Switch Circuit: SPDT
200nA Supply Current
-3db Bandwidth: 9.5MHz
NLAS4684FCT1G Applications
There are a lot of ON Semiconductor NLAS4684FCT1G Analog Switches & Multiplexers ICs applications.
- Channel Banks
- Transmit
- Relay replacements
- Microwave transmission systems
- ATM
- Mechanical reed relay replacement
- DVD-R
- Communications systems
- Ultrasound
- Communication systems