NLAS44599DTR2
| Parameters | |
|---|---|
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 5V |
| Number of Channels | 2 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 2V |
| Operating Supply Current | 4μA |
| Power Dissipation | 450mW |
| Turn On Delay Time | 35 ns |
| Number of Inputs | 4 |
| Supply Type | Single |
| Turn-Off Delay Time | 12 ns |
| -3db Bandwidth | 175MHz |
| On-State Resistance (Max) | 25Ohm |
| Multiplexer/Demultiplexer Circuit | 2:2 |
| Off-state Isolation-Nom | 93 dB |
| Current - Leakage (IS(off)) (Max) | 10μA |
| Channel Capacitance (CS(off), CD(off)) | 10pF 10pF |
| Switch Circuit | DPDT |
| Switch Time (Ton, Toff) (Max) | 14ns, 5ns |
| Charge Injection | 3pC |
| Crosstalk | -90dB @ 100kHz |
| Switching | BREAK-BEFORE-MAKE |
| Voltage - Supply, Single (V+) | 2V~5.5V |
| Normal Position | NC |
| Length | 5mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Lead Free |
| Lifecycle Status | OBSOLETE (Last Updated: 4 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Number of Pins | 16 |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2008 |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Resistance | 30Ohm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Multiplexer or Switches |
| Max Power Dissipation | 450mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | NLAS44599 |
| Pin Count | 16 |
| Number of Outputs | 8 |
NLAS44599DTR2 Overview
Due to its 16-TSSOP (0.173, 4.40mm Width) packaging, the electronic part is convenient for international shipping. High reliability is provided by advanced packaging method Tape & Reel (TR). A switch device like this is mounted in Surface Mount. Multiplexer and demultiplexer circuits have a number 2:2. Operating temperature around -55°C~125°C TA extended. Total terminations are 16. High-quality output is provided by the electronic component's 2 channels. Turning on and running the electrical part should be easy with a 2.5V voltage supply. It is injected into the electrical part body with 16 pins. Multiplexers built on a DPDT switching circuit are built. If you are looking for variants of the digital switch, trying search with NLAS44599. Internally, this switch multiplexer has a resistance of 30Ohm. Datasheets for functions of 16 pins are available. There is a standard Multiplexer or Switches analogue multiplexer here. Users shouldn't supply more than 5.5V voltage to the switch device. A analog switch ic that has a cost-effective Single supply type. 2V is the lowest voltage that should be fed to the electronic electronic part. The switch device would be able to operate with 4μA current. Using a single voltage supply, this switch device consumes 2V~5.5V volts. The electrical part can be operated at 5V voltage levels. Operating the 4 inputs requires 4 inputs. A analog switch ics with 8 outputs is included.
NLAS44599DTR2 Features
2 Channels
Switch Circuit: DPDT
4μA Supply Current
-3db Bandwidth: 175MHz
NLAS44599DTR2 Applications
There are a lot of ON Semiconductor NLAS44599DTR2 Analog Switches & Multiplexers ICs applications.
- USB 1.1 signal switching circuits
- MP3 players
- Cross Connects
- Fiber In The Loop (FITL)
- Power routing
- E1 Network Equipment
- Medical
- Automatic test equipment
- Modems
- Residential Gateways, Home Gateway/Router