NJM311M-TE1
| Parameters | |
|---|---|
| Surface Mount | YES |
| Number of Pins | 8 |
| JESD-609 Code | e6 |
| Pbfree Code | yes |
| Number of Terminations | 8 |
| Terminal Finish | Tin/Bismuth (Sn/Bi) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Subcategory | Comparators |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Output Type | TOTEM POLE |
| Temperature Grade | COMMERCIAL EXTENDED |
| Number of Channels | 1 |
| Max Supply Voltage | 36V |
| Min Supply Voltage | 5V |
| Power Dissipation-Max | 300mW |
| Nominal Supply Current | 4.3mA |
| Max Supply Current | 7.5mA |
| Current - Output | 5.1mA |
| Response Time | 200 ns |
| Amplifier Type | COMPARATOR |
| Current - Input Bias | 250nA |
| Output Current per Channel | 5.1mA |
| Input Offset Voltage (Vos) | 7.5mV |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Voltage Gain | 106dB |
| Average Bias Current-Max (IIB) | 0.25μA |
| Bias Current-Max (IIB) @25C | 0.25μA |
| Height Seated (Max) | 2mm |
| Length | 5mm |
| Width | 5mm |
| RoHS Status | RoHS Compliant |
NJM311M-TE1 Overview
The comparator has a type TOTEM POLE output.There are8 terminals on the comparator.The electrical component in this case belongs to the Comparators families.When supplied with 15V voltage, the comparator is capable of performing a wide range of tasks.The pinout of the component starts from 8 pins it has.There are 8 pins on the comparator.Normally, the nominal supply current should be 4.3mA when using the device.If the current supply exceeds 7.5mA , the comparator could malfunction.Based on the voltage formula, the voltage gain of the part is 106dB .Comparator electronics is not recommended to operate the system at a temperature above 85°C .A temperature lower than -40°C is unsuitable for the device.Comparator electronics is specified that the comparator's maximum supply voltage is 36V .The comparator is capable of operating at a minimum supply voltage of 5V .For the output quality to be maintained, 1 channels work together.This comparator basically consists of a COMPARATOR amplifier with very high gain.Comparator electronics has an output current rated at 5.1mA .
NJM311M-TE1 Features
TOTEM POLE output capability
Voltage Gain: 106dB
COMPARATOR amplifier
NJM311M-TE1 Applications
There are a lot of New Japan Radio (NJR) NJM311M-TE1 linear comparators applications.
- Threshold Detectors
- Window Comparators
- Simple Analog-to-Digital Converters (ADCs)
- General Purpose Low Voltage Applications
- Analog front end
- Lithium ion battery monitoring
- Multivibrators and High-Voltage Digital Logic Gates
- Appliances
- Battery-Powered Electronics
- Body Control Modules