NIF5002NT1
| Parameters | |
|---|---|
| Pin Count | 4 |
| Number of Outputs | 1 |
| Qualification Status | Not Qualified |
| Output Type | N-Channel |
| Max Output Current | 2A |
| Interface | On/Off |
| Output Configuration | Low Side |
| Power Dissipation | 1.1W |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Continuous Drain Current (ID) | 2A |
| Ratio - Input:Output | 1:1 |
| Gate to Source Voltage (Vgs) | 14V |
| Voltage - Load | 42V Max |
| Fault Protection | Current Limiting (Fixed), Over Temperature, Over Voltage |
| Drain to Source Breakdown Voltage | 42V |
| Turn On Time | 30 µs |
| Output Peak Current Limit-Nom | 5.7A |
| Rds On (Typ) | 165m Ω |
| Drain to Source Resistance | 165mOhm |
| Built-in Protections | TRANSIENT; OVER VOLTAGE; THERMAL |
| Output Current Flow Direction | SINK |
| Length | 6.5mm |
| Width | 3.5mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
| Lifecycle Status | OBSOLETE (Last Updated: 3 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | TO-261-4, TO-261AA |
| Number of Pins | 4 |
| Operating Temperature | -55°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2006 |
| Series | HDPlus™ |
| JESD-609 Code | e0 |
| Feature | Auto Restart, Slew Rate Controlled |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Voltage - Rated DC | 42V |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 12V |
| Terminal Pitch | 2.3mm |
| Reach Compliance Code | not_compliant |
| Current Rating | 2A |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | NIF5002N |
NIF5002NT1 Overview
The LED driver's packaged as a Tape & Reel (TR).There is a TO-261-4, TO-261AA package that includes it.This LED driving board is mounted using the mounting type Surface Mount.It owns the General Purpose switch type.It is recommended that the temperature be set to -55°C~150°C TJ for reliable performance.It is possible to use 1 outputs in the lighting driver.With a supply voltage of Not Required, the LED driving board operates.The maximum output voltage is N-Channel volts.Auto Restart, Slew Rate Controlled features are available on the lighting driver.It belongs to the family NIF5002N.For operation, 4 pins are used.Currently, there are 1 functions associated with the lighting driver.To comply with the operation criteria, the maximum output current is reduced to 2A.High efficiency is possible at 12V supply voltage.4 pins are connected to it in total.This electrical component is part of the HDPlus? series.
NIF5002NT1 Features
Supplied from 12V
NIF5002NT1 Applications
There are a lot of ON Semiconductor NIF5002NT1 Power Switches ICs applications.
- HDD, SSD
- Hard Disk Drives
- Handheld Devices
- Solid State Drivers
- USB Protection
- Portable GPS Device
- Portable GPS
- Wireless/Networking Cards
- USB Ports/Hubs
- Portable Music Players