NID9N05CL
| Parameters | |
|---|---|
| Lifecycle Status | OBSOLETE (Last Updated: 1 week ago) |
| Mounting Type | Surface Mount |
| Package / Case | TO-252-3, DPak (2 Leads + Tab), SC-63 |
| Surface Mount | YES |
| Number of Pins | 3 |
| Transistor Element Material | SILICON |
| Operating Temperature | -55°C~175°C TJ |
| Packaging | Tube |
| Published | 2006 |
| Series | Automotive, AEC-Q101 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 2 |
| Terminal Finish | Tin/Lead (Sn80Pb20) |
| Additional Feature | ESD PROTECTED |
| Subcategory | FET General Purpose Power |
| Voltage - Rated DC | 52V |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 235 |
| Reach Compliance Code | not_compliant |
| Current Rating | 8A |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | NID9N05CL |
| Pin Count | 3 |
| JESD-30 Code | R-PSSO-G2 |
| Number of Outputs | 1 |
| Qualification Status | Not Qualified |
| Output Type | N-Channel |
| Max Output Current | 9A |
| Number of Elements | 1 |
| Interface | On/Off |
| Element Configuration | Single |
| Output Configuration | Low Side |
| Operating Mode | ENHANCEMENT MODE |
| Power Dissipation | 1.74W |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Case Connection | DRAIN |
| Input Type | Non-Inverting |
| Switch Type | Relay, Solenoid Driver |
| Transistor Application | SWITCHING |
| Rise Time | 500ns |
| Fall Time (Typ) | 1.8 μs |
| Turn-Off Delay Time | 2.5 μs |
| Continuous Drain Current (ID) | 9A |
| Ratio - Input:Output | 1:1 |
| Gate to Source Voltage (Vgs) | 15V |
| Voltage - Load | 52V Max |
| Drain Current-Max (Abs) (ID) | 9A |
| Fault Protection | Over Voltage |
| Drain to Source Breakdown Voltage | 52V |
| Input Capacitance | 250pF |
| FET Technology | METAL-OXIDE SEMICONDUCTOR |
| Rds On (Typ) | 90m Ω |
| Drain to Source Resistance | 90mOhm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
NID9N05CL Overview
As a result, it is packaged in the form of a Tube.This file is included in package TO-252-3, DPak (2 Leads + Tab), SC-63.The lighting driver has the mounting type Surface Mount.It owns the Relay, Solenoid Driver switch type.It is recommended that the temperature be set to -55°C~175°C TJ for reliable operation.As a default, the output is set to 1.The LED driving board operates with a supply voltage of Not Required.A maximum output voltage of N-Channel volts can be achieved by this LED driver.As you can see, it comes from the NID9N05CL family.There are 2 terminations in it.3 pins are used for operation.The maximum output current must drop to 9A to meet the operation criteria.The LED driving board is equipped with a total of 3 pins.There is an electrical component included in the Automotive, AEC-Q101 series.A self-contained econtainer holding FET General Purpose Power capacity contains this lighting driver.As well as producing ESD PROTECTED, this LED driving board is capable of producing [1].As a whole, there are 1 elements.There are SWITCHING transistor applications on the LED driver.
NID9N05CL Features
Additional features like ESD PROTECTED
Transistor applications such as SWITCHING
NID9N05CL Applications
There are a lot of ON Semiconductor NID9N05CL Power Switches ICs applications.
- Set-top-box
- Wireless/Networking Cards
- Storage Drives
- Portable GPS
- Notebook and Tablet Computers
- Portable Video Game Players
- Hot Swaps
- HDD, SSD
- USB Protection
- Wireless Headsets