NCV8460ADR2G
| Parameters | |
|---|---|
| Factory Lead Time | 17 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Contact Plating | Tin |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2005 |
| JESD-609 Code | e3 |
| Feature | Auto Restart, Slew Rate Controlled, Status Flag |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Subcategory | Peripheral Drivers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 13.5V |
| Pin Count | 8 |
| Number of Outputs | 1 |
| Qualification Status | Not Qualified |
| Output Type | N-Channel |
| Max Output Current | 6A |
| Supply Voltage-Min (Vsup) | 6V |
| Interface | On/Off |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Halogen Free | Halogen Free |
| Nominal Input Voltage | 36V |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 6V~36V |
| Driver Number of Bits | 1 |
| Fault Protection | Current Limiting (Fixed), Open Load Detect, Over Temperature, Over Voltage, UVLO |
| Output Peak Current Limit-Nom | 9A |
| Rds On (Typ) | 60m Ω |
| Built-in Protections | TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL; UNDER VOLTAGE |
| Output Current Flow Direction | SINK |
| Length | 5mm |
| Width | 3.9mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
NCV8460ADR2G Overview
Tape & Reel (TR) is the way it's packaged.It is included with the 8-SOIC (0.154, 3.90mm Width) package as well.In this case, the LED driving board is mounted as Surface Mount.The switch type is General Purpose.To ensure reliable operation, set the temperature to -40°C~150°C TJ.The LED driver is equipped with 1 outputs.Operation is based on a supply voltage of Not Required.A maximum output voltage of N-Channel volts can be obtained with this LED driver.As far as features are concerned, the LED driving board has Auto Restart, Slew Rate Controlled, Status Flag.It consists of 8 terminations in total.The operation is performed through the 8 pins.As far as the lighting driver is concerned, there are 1 functions.As a result, the maximum output current is reduced to 6A in order to meet the operation requirements.High efficiency is possible when the supply voltage is set to 13.5V.This LED driver is equipped with a total of 8 pins.A self-contained LED driver with a capacity of Peripheral Drivers is contained in an econtainer.A normal operation requires that the supply voltage (Vsup) remain above 6V.
NCV8460ADR2G Features
Supplied from 13.5V
NCV8460ADR2G Applications
There are a lot of ON Semiconductor NCV8460ADR2G Power Switches ICs applications.
- HDD, SSD
- USB Power Distribution
- Wireless Headsets
- Telecom and Network Systems
- PDAs
- Wireless Modem Data Cards
- Hot Swaps
- Portable GPS
- Wearable Devices
- Storage (HDDs, SSDs)