NCS2200SQLT1
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 6-VDFN Exposed Pad |
| Operating Temperature | -40°C~105°C |
| Packaging | Tape & Reel (TR) |
| Published | 2005 |
| Series | NCS2200 |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Subcategory | Comparators |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 3V |
| Terminal Pitch | 0.65mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | NCS220* |
| Pin Count | 6 |
| JESD-30 Code | R-XDSO-N6 |
| Qualification Status | Not Qualified |
| Output Type | Complementary, Rail-to-Rail |
| Number of Elements | 1 |
| Nominal Supply Current | 15μA |
| Output Current | 70mA |
| Max Supply Current | 15μA |
| Propagation Delay | 1.1 μs |
| Quiescent Current | 17μA |
| Response Time | 1100 ns |
| Common Mode Rejection Ratio | 80 dB |
| Voltage - Supply, Single/Dual (±) | 0.85V~6V |
| Output Current per Channel | 70mA |
| Input Offset Voltage (Vos) | 5mV |
| Power Supply Rejection Ratio (PSRR) | 80dB |
| Supply Voltage Limit-Max | 6V |
| Max Input Current | 1pA |
| Input Bias Current | 1pA |
| Current - Quiescent (Max) | 17μA |
| Voltage - Input Offset (Max) | 5mV @ 6V |
| Current - Input Bias (Max) | 1pA @ 6V |
| Hysteresis | 20mV |
| CMRR, PSRR (Typ) | 70dB CMRR, 80dB PSRR |
| Length | 2.2mm |
| Width | 2mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
NCS2200SQLT1 Overview
The product is packaged in 6-VDFN Exposed Pad to facilitate transportation.There is a comparator of type Complementary, Rail-to-Rail output on this device.The part will be shipped by Tape & Reel (TR) .The device is designed with 6 terminations.The electrical component in this case belongs to the Comparators family.In the presence of a 3V voltage, the comparator is capable of accomplishing a variety of demanding tasks.The type of the chip can be classified as General Purpose .This is a 1 element comparator.The device contains 6 pins.Electronic comparator is recommended to mount using type Surface Mount .If you want to avoid malfunction, you should set the operating temperature to -40°C~105°C .You can search NCS220* if you are looking for more pin-to-pin solutions.The comparator presents a quiescent current of 17μA volts.The PCB or other board has a Surface Mount for mounting.Normal operation of the device requires 15μA supply current.If the current supply exceeds 15μA , the comparator could malfunction.Electronic comparator is possible to input a maximum of 1pA current into the device.The part is from NCS2200 comparator series.
NCS2200SQLT1 Features
Complementary, Rail-to-Rail output capability
General Purpose IC
Employing 1 elements
Operates under -40°C~105°C
Quiescent Current: 17μA
NCS2200SQLT1 Applications
There are a lot of ON Semiconductor NCS2200SQLT1 linear comparators applications.
- Handheld Instruments
- Multivibrators and High-Voltage Digital Logic Gates
- High-Speed Differential Line Receiver
- Notebooks and PDAs
- RC Timers
- Automotive
- Portable and Battery-Powered Systems
- Hand-Held Electronics
- Metering Systems
- Mobile Phones