NCP5901MNTBG
| Parameters | |
|---|---|
| Turn-Off Delay Time | 30 ns |
| Rise / Fall Time (Typ) | 16ns 11ns |
| Interface IC Type | BUFFER OR INVERTER BASED MOSFET DRIVER |
| Channel Type | Synchronous |
| Number of Drivers | 2 |
| Driven Configuration | Half-Bridge |
| Gate Type | N-Channel MOSFET |
| High Side Driver | YES |
| Logic Voltage - VIL, VIH | 1V 2V |
| Height | 950μm |
| Length | 2mm |
| Width | 2mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 11 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 10 hours ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-VFDFN Exposed Pad |
| Number of Pins | 8 |
| Operating Temperature | 0°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2011 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin (Sn) |
| Subcategory | MOSFET Drivers |
| Voltage - Supply | 4.5V~13.2V |
| Terminal Position | DUAL |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | NCP5901 |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Output Voltage | 35V |
| Nominal Supply Current | 12.2mA |
| Propagation Delay | 35 ns |
| Input Type | Non-Inverting |
| Turn On Delay Time | 30 ns |
| Halogen Free | Halogen Free |
| Rise Time | 16ns |
| Fall Time (Typ) | 11 ns |
NCP5901MNTBG Overview
Its 8-VFDFN Exposed Pad package provides greater flexibility.There is a package in the form of Tape & Reel (TR).Configuration is supported by 2 drivers.Surface Mount is mounted in the way of the device.In the absence of a power supply voltage of 4.5V~13.2V V, it is able to demonstrate its superiority.Gate drivers is designed wGate driversh a gate type of N-Channel MOSFET.This device allows temperatures in the range of 0°C~150°C TJ.This program uses the input type of Non-Inverting.Its configuration starts with 8 terminations.Numerous related parts can be found under its base part number NCP5901.The device is mounted using Surface Mount.When designing, the device is configured with 8 pins.With a supply voltage of 5V, it is designed to operate.Mosfet driver is equipped wMosfet driverh an interface chip BUFFER OR INVERTER BASED MOSFET DRIVER.There are several useful electronic components in this subcategory of MOSFET Drivers.A board with 8 component pins is available.Mosfet gate drivers outputs 35V as voltage.
NCP5901MNTBG Features
Embedded in the Tape & Reel (TR) package
2 drivers
Employing a gate type of N-Channel MOSFET
8 pins
NCP5901MNTBG Applications
There are a lot of ON Semiconductor NCP5901MNTBG gate drivers applications.
- 3-Phase Motor Inverter Driver
- Isolated switch mode power supplies (SMPS)
- Isolated Supplies for controller area network (CAN),
- Isolated Supplies for Motor Control
- Motor Control
- Telecom switch mode power supplies
- AC-DC Inverters
- Portable computers
- Commercial air-conditioning (CAC)
- General Purpose 3-Phase Inverter