NCP4543IMN5RG-A
| Parameters | |
|---|---|
| Factory Lead Time | 19 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 18-VFQFN Exposed Pad |
| Number of Pins | 18 |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2012 |
| Series | ecoSWITCH™ |
| JESD-609 Code | e3 |
| Feature | Slew Rate Controlled |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 18 |
| ECCN Code | EAR99 |
| Resistance | 16mOhm |
| Terminal Finish | Tin (Sn) |
| Power Rating | 1.98W |
| Max Power Dissipation | 1.98W |
| Terminal Position | QUAD |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Pin Count | 18 |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Max Output Current | 7.3A |
| Operating Supply Voltage | 5.5V |
| Number of Channels | 1 |
| Voltage | 6V |
| Interface | On/Off |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Adjustable Threshold | NO |
| Input Type | Non-Inverting |
| Turn On Delay Time | 540 μs |
| Switch Type | General Purpose |
| Min Input Voltage | 500mV |
| Max Input Voltage | 6V |
| Halogen Free | Halogen Free |
| Turn-Off Delay Time | 1.2 μs |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 3V~5.5V |
| Rds On (Typ) | 10.5m Ω |
| Height | 950μm |
| Length | 3mm |
| Width | 3mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
NCP4543IMN5RG-A Overview
It is packaged in the form of a Tape & Reel (TR).This package is included in 18-VFQFN Exposed Pad.Mounting type Surface Mount is selected for the LED driving board.The switch type of this switch is General Purpose.Ensure reliable operation by setting the temperature to 0°C~70°C TA.The lighting driver has a total of 1 outputs that are available for use.Operation is based on a supply voltage of Not Required.There is a maximum output voltage of N-Channel volts on this LED driver.There are Slew Rate Controlled features available on the LED driving board.It contains 18 terminations.For operation, 18 pins are used.The LED driving board has a total of 1 functions.This results in the maximum output current dropping to 7.3A to meet the operation criteria.The supply voltage of 3.3V is conducive to high efficiency.In this case, it is mounted in the way of Surface Mount.A total of 18 pins are included in this LED driver.The LED driver has 16mOhm resistance.It belongs to the ecoSWITCH? series.The gadget uses an analog IC, which is POWER SUPPLY SUPPORT CIRCUIT in this case.In total, 1 channels are available.In order to maximize efficiency, the supply voltage should be set to 5.5V.There is a maximum input voltage of 6V volts.It requires 500mV volts as the minimum input voltage.
NCP4543IMN5RG-A Features
Supplied from 3.3V
Resistance of 16mOhm
1 channels
NCP4543IMN5RG-A Applications
There are a lot of ON Semiconductor NCP4543IMN5RG-A Power Switches ICs applications.
- USB Power Distribution
- Low Voltage I/O System Power
- Solid-State Drives
- USB Ports/Hubs
- Portable Devices
- PC Cards
- Portable GPS
- Wearable Devices
- Hot Swap
- Hot-Swap Systems